Tag Archives: French Air Force

Arsenal de l’Aéronautique VG.33

French flag France (1936-1940)
Fighter – 25 Built & ~200 Incomplete [Destroyed]

The VG.33 on an airfield. Colorized by Amazing Ace

Arsenal de l’Aéronautique was one of the more peculiar plane manufacturers of interwar France, though it is also one of the somewhat more obscure ones. Arsenal was a state company which was created towards the end of 1934. Its goal at the time was to provide a way to train aviation engineers employed by the French state, and to help them evaluate design proposals. It would also be tasked with studying aircraft designs without the profitability constraints of a private company, meaning Arsenal de l’Aéronautique would typically be used to study experimental projects not necessarily meant to see mass-production. Following the mass nationalization of France’s aircraft industry ,which began in August 1936 under the Popular Front’s government, Arsenal was given eight hangars built by Bréguet in Villacoublay, near Paris, to install its design bureau and production facilities.

Roots in Tandem-Engine Fighter Designs

The timeline of the VG 33’s predecessors tends to be somewhat unclear. It is generally considered that the fighters hold their roots in tandem-engine designs, which were being studied at the request of the French state in the mid to late 1930s. The VB10, which would be manufactured postwar, was one result of these studies. However, orders to design such tandem designs appear to date from 1937 according to some sources, while a mockup of the VG 33’s direct predecessor, the VG 30, appeared in November of 1936.

The Arsenal VG.30 mockup, the beginning of the VG.3X series of fighters, at the Paris air show of November 1936. [arsenalvg33.free.fr ]
In any case, the engineers of Arsenal, led by lead engineer Michel Vernisse, presented their new plane at the 15th Paris Air Show in November 1936. The design they had worked on appears to date from early 1936, and was an attempt to compete with contemporary fighter designs, such as the MS.405 or LN 161 . This aircraft would be designated the Arsenal de L’aéronautique VG.30.

The VG.30: An Impressive First Draft

The VG.30 mockup which was first presented at the Paris air show was a low cantilever-wing monoplane powered ,originally, by the Potez 12dc 610 hp in-line engine. The plane was to use an almost exclusively wooden construction, which would save on cost and strategic resources (though this would prove less so the case than expected when it was found France lacked the spruce wood reserves to build the aircraft and had to purchase large quantities abroad to compensate for this issue). It had a capable armament of one 20 mm HS-404 firing through the propelled hub, and four wing-mounted 7.5 mm MAC 34 machine-guns. The wings had a surface of 14 m². When first unveiled, the VG.30 had a very modern appearance and drew considerable interest from France’s air ministry. So much so that, in early 1937, the Air Ministry set requirements for a competition, the “A.23”, for French aircraft designers to offer light fighter aircraft designs. This opened up some competition to the VG.30, which would materialize in several prototypes, such as the (Bloch MB.700, SNCAO CAO.200, Roussel R.30).one design, Caudron’s C.714, would enter production (Caudron’s very light C.714)

Arsenal worked on adapting their VG.30 to these requirements and then manufactured a prototype. Manufacturing of the prototype started during the summer of 1937, and faced some considerable delays. Notably, the Potez engine could not be delivered, which pushed the Arsenal designers to switch to another engine, Hispano-Suiza’s 12Xcrs, which would provide a considerable power increase up to 690 hp. This change would start the association between Arsenal’s VG.3X series fighters and Hispano-Suiza in-line engines.

A small but nonetheless rare view of the VG.30 prototype during flight. [Internet Movie Plane Database]
The first prototype of the VG.30 had its first flight on the 15th of October 1938. It would still have to wait several months for official state trials, in which some subsequent modifications were made to the aircraft. in July of 1939 were the state trials undertaken. The VG.30 proved to have decent performance for a light fighter with a Hispano-Suiza powerplant that was not the most powerful of these available; up to 485 km/h in level flight. In a dive, the VG.30 was found to reach 805 km/h.

The VG.30 prototype on the ground during trials. [arsenalvg33.free.fr ]

Improving Upon the VG.30

The VG.30 had been found to be a rather capable design, but it had room for improvement. This was done by designing the VG.31. An issue with the VG.30 was that the radiator was fairly far forward. Being further in front than the cockpit, it was found not to be ideal for the plane’s aerodynamic profile. The VG.31 had its radiator moved back by two meters, and also had the wing surface reduced by two square meters. A more powerful engine was fitted in the form of the Hispano-Suiza 12Y-31 860 hp, which did not however feature a 20 mm gun firing through the propeller hub. Two of the wing machine-guns were also removed, with only two 7.5 mm MAC 34s remaining as armament.

The VG.31 was never flown. It appears a fuselage was built, but was then converted to a VG.33 which was also never flown, but used as a model to base production upon.

The VG.33: First Production Model

Wind tunnel trials of the VG.31 showed that its reduced wingspan resulted in aerodynamic instability. Its reduced armament was also a major issue. However, its radiator, pushed back to the rear, appeared to be a good design choice in order to reduce drag and improve the aerodynamic profile of the series.

In designing a more advanced version, the best parts of the VG.30 and VG.31 were combined. The new fighter, the VG.33, would combine the wingspan and armament of the VG.30, with the fuselage and engine of the VG.31 – modified to mount a 20 mm HS-404 firing through the propeller hub.

Production of the VG.33 prototype started in 1938, and the prototype took flight for the first time on the 25th of April 1939. The official trials would last from July of 1939 to March of 1940, and were generally very positive.

Design: The Structure of the VG.33

A photo of the first VG.33 prototype during production in late 1938, showing the wooden structure of the aircraft before the plywood cover was applied. [Le Fana de l’Aviation n°199]
Schematics of the wing structure of the VG.33, which was mostly made using spruce. [Le Fana de l’Aviation n°199]
The VG.33 was designed using a largely wooden construction, made mostly of spruce. Almost all of the plane’s internal structure was wooden, and then given a plywood skin. The VG.33 used a semi-monocoque fuselage and a one-piece wing structure. The plane had a wingspan of 10.80 m, with each wing having a surface of 14 m². The plane was 8.55 m long, and 3.35 m high. Empty, it would weigh around 2,050 kg. When loaded, it would be between 2,450 and 2,896 kg (the second prototype would be weighed at 2,680 kg in seemingly standard configuration, with guns, fuel and pilot). The VG.33’s landing gear deployed outward.

The mounting of the Hispano-Suiza 12Y-31 engine onto a VG.33. [Le Fana de l’Aviation n°199]
The VG.33 used a Hispano-Suiza 12Y-31. This was a V12 engine producing 860 hp maximum at a critical altitude of 3,320 m, and at 2,400 rpm. This engine was fitted with a three-bladed Chauvière variable pitch propeller with a diameter of 2.95 m. This propeller would rotate at up 1,600 rpm. The water radiator was located below the cockpit,and was recessed into the fuselage as a way to reduce drag as much as possible. Upon take-off, a VG.33 would weigh 2,680 kg.

Firing through the propeller hub was the plane’s heaviest armament: a 20 mm HS-404 autocannon. Found on most French fighters of the era, this cannon fired 250 grams projectiles at a muzzle velocity of 880 m/s. It was fed by a 60-round drum magazine, which would typically be expended quite quickly considering the weapon typically fired at 570 to 700 rpm. Additionally, two MAC34M39 machine-guns were located in each wing. The M39 was the belt-fed version of the original MAC34 aircraft machine-gun, which initially used drum magazines. The 9 gram 7.5 mm projectiles were fired at 830 m/s, and 1,200 to 1,450 rpm. With a larger ammunition provision of 850 rounds per gun, the machine-guns could be kept firing much longer than the cannon.

The VG.33 featured the standard radio of the French air force at the time, the RI 537.

Performance

The VG.33 on an airfield, giving a good angle on the plane’s sleek profile and radiator. [Pinterest]
The trials undertaken from July of 1939 to March of 1940 gave a very good impression of the Arsenal VG.33, which could reasonably be considered the best French single-engine fighter of the era.

At its optimal altitude of 5,200 m, the VG.33 could reach a maximum speed of 558 km/h. This was faster than the newest French fighter of the time, the D.520, by about 20 km/h. The take-off speed would be of about 135 km/h, with a take-off distance of about 550 m. The landing speed was 125 km/h. The plane’s climb-rate was also a strength of the design. It would reach 1,000 m in 1.17 minutes, 2,000 in 2.34, 5,000 in 6.26 and 8,000 in 13.26. The plane had an operational ceiling of roughly 9,500 m.

The VG.33 had a maximum range of 1,060 km with its full fuel load of 400 litres. At an altitude of 5,000 m, it had an endurance of two hours and forty minutes There were trials for additional fuel tanks on the VG.30, which could perhaps have been applied to the VG.33 as well. The plane would then have a fuel load of 600 litres, and it was expected a VG.33 could cross up to 1,560 km, or fly for four hours and twenty minutes.

A view of the instrument board in the VG.33’s cockpit. [Pinterest]
Posessing superb performance, forgiving flight characteristics, and good maneuverability, the VG.33 was a great fighter for its day . The first report made by the CEMA, the French Air Force’s evaluation service, in September in 1939, found the plane had excellent and well-balanced control surfaces which were effective at all speeds. Even at low speed, the plane remained very controllable all the way down to the stall speed, which made it easy to perform landings with. Furthermore, there was no particular imbalance and no risk of the plane losing control and nosing over. Taking-off was also not hard on the VG.33. The plane had no issues keeping a straight trajectory on the runway,and was considered very controllable even on the ground. The landing gear was found to be reliable and safe. The only somewhat lacking element was found to be the plane’s brakes, which were perhaps not as powerful as would be appreciated.

In comparison to the D.520 – which was already a decent fighter – the VG.33 compared favorably in pretty much all areas. This was even more of an achievement when taking into account the weights and powerplants of the two planes. The D.520’s weight was about equal to the VG.33 (2,050 kg empty, 2,740 kg fully loaded), however, it used a more powerful version of the same series of Hispano-Suiza 12Y engine, the 12Y-49. In comparison to the VG.33’s 12Y-31, the 12Y-49 producded 90 hp more, with a maximum output of 950 hp. This did not prevent the VG.33 from being faster than the D.520, climbing at a higher rate, and being more manoeuvrable, while featuring the exact same armament. In other words, the VG.33 would be, by the standards of 1939 and1940, a stellar fighter, very much able to compete with the newest designs from Germany or Great-Britain, the likes of the Bf109E and Spitfire. The plane would also have enough evolutionary potential to birth a series of fighters lasting potentially well into the war

A view of the uncovered 12Y-31 engine of a likely unfinished VG.33, the photo likely being of German origin. The 12Y-31 was not the most powerful version of the 12Y engine available by 1940, yet it was sufficient for the VG.33 to outclass fighters such as the D.520 powered by more powerful models of the same engine family. [hisaviation.com]

Production Orders and Setting Up the VG.33’s production

The outbreak of the Second World War in September of 1939 led to Arsenal’s fighter,which had been undertaking trials for several months at this point, being ordered into production. A first order was placed on the 12th of September, for 220 VG.33s.

Arsenal de L’Aéronautique lacked any facilities suited for mass-production. As such, production of the VG.33 would be undertaken by the SNCAN factory of Sartrouville, South-West of Paris. Five days after the first order, an additional 200 VG.33s were ordered, with the fighter being thought of as a good potential replacement for the aging Morane-Saulnier MS.406.

In the following months, orders and scheduled production of the VG.33 would evolve considerably, with the type quickly being seen as a future mainstay fighter for the French air force. By late September 1939, it was planned that the first 10 serial-production VG.33s were to be delivered in April of 1940, with production gradually rising to 150 planes a month by the autumn. The schedule was revised in November, with the 10 examples then being scheduled for February, and production to be set at 50 planes a month from April onward at the SCAN factory. It was already understood that a second assembly line would be required at this point. It was planned to open an assembly line in Michelin’s factories of Clermont-Ferrand, in the region of Auvergne in Southern France. This facility would not produce the VG.33, but one of its derivatives, the VG.32, of which the first were to be completed in December of 1940. There were also plans to set up a VG.33 production chain in Vendée, Western France.

VG.33 fuselages (top) and wing structures (bottom) during production. [Le Fana de l’Aviation n°199]
The flap of a VG.33 during production in a workshop. [arsenalvg33.free.fr ]
Production of the VG.33 required a large number of small producers. The aircraft’s largely wooden construction meant that a lot of parts could be supplied by cottage industry sources. Nonetheless, the production of the plane was quite consuming in terms of resources. To produce a single VG.33, 1,166 kg of spruce, 110 kg of plywood, 880 kg of steel, 436 kg of aluminum and duralumin and 125 kg of magnesium was required. Even if mostly wooden, a large quantity of steel was still consumed in the aircraft’s production. The most significant efforts in providing the materials needed to produce the VG.33 were not spent in acquiring any of the steel though, but rather the spruce wood. The French Air Force only had a reserve of 750 tonnes, and the wood was also used to manufacture some reconnaissance or training aircraft, meaning this available reserve would only be sufficient to provide for about 500 VG.33s. France had to start a scramble to acquire spruce from foreign sources. In November, the acquisition of 500 m3 of spruce from Great-Britain was negotiated. In the meantime, France also bought spruce not only from its traditional suppliers, the USA and Canada, but also from an additional source, Romania. Romanian spruce was soon found to be lacking in comparison to the North American-sourced material. However, it would still be sufficient for less strategically important reconnaissance or training aircraft, freeing up better quality spruce for the VG.33, which had become an absolute priority of the French air ministry by the spring of 1940. In terms of cost, the airframe of the VG.33, without engine or armament, cost 630,000 French francs to produce. This was less than the D.520 (700,000) or MB.152 (800,000), and the VG.33 could be considered to be a fairly economical fighter – though not as much as the much lighter, and less capable, Caudron C.714, born from the same specifications .

Too Little, Too Late

The first production schedule for the VG.33 evolved considerably over the months.At the outbreak of the war, it was expected that the first VG.33s would be delivered in April 1940. In November 1939, the date for the first expected deliveries was changed to February 1940. In January of 1940, it appeared obvious this schedule would not be met and the new set date for the first VG.33 deliveries was March. Finally, in March, the first VG.33 were not yet completed, and the schedule was moved again to April of 1940, where it originally was at the start of the war. Finally, the first production aircraft would take flight on the 21st of April 1940. The next two production aircraft followed in early May. Eventually, 7 production aircraft would be taken into the French Air Force’s registry. The aircraft’s production and service was cut short by the German invasion of the Low Countries and France, with the production facilities at Sartrouville being occupied by German troops around the 14-15th of June 1940.

Side view of a VG.33. Taken in Toulouse, Southern France, in 1942, this photo shows one of the few production aircraft which could be evacuated to Southern France in time. [Le Fana de l’Aviation n°199]
The first squadron the VG.33 was supposed to enter service with was the GC ½, which previously operated the MS.406, far outclassed by the D.520 or Bf.109E. This squadron was allocated its two first aircraft, the 2nd and 4th production VG.33s, on the 10th of June 1940. The squadron, already engaged in the campaign, could not allocate any pilots to recover the aircraft. In the end, pilots of a reconnaissance group, GR 1/55, took them and relocated them from the under threat airport of Villacoublay, near Paris, to the far-away Toulouse-Francazal, deep in Southern France. Production planes n°1 and n°7 were moved to Clermont-Ferrant, where they were supposed to serve as models for the future VG.32 assembly chain. A fifth aircraft was moved to Southern France, n°7, in uncertain conditions.

Two VG.33s were reportedly part of an ad-hoc defensive squadron created in Bordeaux in June, GC I/55 active from the 17th to the 24th. According to some scaint claims, they may have been engaged in a few combat missions in the last days of the campaign of France. Two VG.33s are known to have been captured by German forces on Mérignac airfield, in Gironde, the same region as Bordeaux. These may have been the same aircraft.

Two production VG.33s captured intact by the Germans in Mérignac, Gironde. [Le Fana de l’Aviation n°199]
Outside of these 7 aircraft taken in by the French air force, production at SCAN’s facilities in Sartrouville had been starting to pick up steam, and a number of aircraft were at various stages of production. It appears a total of 19 fighters had been completed. 20 more lacked only their landing gear and were near completion. Seemingly, at least 120 more fuselages were at various stages of production. The vast majority of these were sabotaged in extremis to prevent advancing German troops from capturing them. Notably, the completed fighters, that had yet to be taken in by the French air force were destroyed by the crew of a Potez 540 reconnaissance bomber on the 14th of June using sledgehammers, mere hours before German troops would seize the facilities. This did not prevent the Germans from getting their hands on a few VG.33s. Two VG.33s were seemingly captured in Mérignac airfield. Located near Bordeaux, these two planes may have been those part of an ad-hoc defensive squadron. At least one aircraft would be repainted in German colors and tested extensively, likely at Rechlin airfield, Germany, and given the registration number “3+5”. According to some sources, the Germans would capture a total of five serial production VG 33s as well as the original prototype.

An uncompleted VG.33, likely photographed by the picture services of Germany’s armed forces in Sartrouville. [Le Fana de l’Aviation n°199]
The VG.33 which would be tested by German pilots at the Rechlin airfield. [Armedconflicts.com]
Another photograph of the VG.33 which was captured by the Germans [Armedconflicts.com]

A Series of Derivatives, France’s Potentially Mainstay World War Two fighter

Though the VG.33 was already a very potent fighter by 1940, there were already plans to improve upon it, generally by improving its powerplant. A variety of prototypes, mostly based on VG.33 airframes and given alternative designations as VG.33 prototypes, were flown in the Spring of 1940 and would have given Arsenal’s new series of fighters a more promising fate, were it not for the German occupation of France.

The VG.32, developed before the VG 33, but never flown, replaced the 12Y-31 engine with an American-sourced Allison V-1710-C15 1,150 hp engine. A model from the same series of engines would be fitted into the American P-40 Warhawk fighter. While also being more powerful than the Hispano-Suiza 12Y, the most significant advantage of the Allison engine was that it would relieve France’s strained engine industry. By producing the relatively easy to build VG.33 airframe and giving it an engine which would not strain the local industry, France would have a fighter that would require comparatively few work hours. The fifth VG.33 prototype airframe, VG.33-05, was supposed to receive the Allison engine and be the VG.32 prototype. However, the engine was not delivered before the armistice and, as such, the prototype was never flown. Nonetheless, the VG.32 had been ordered for serial production. Production was to be set-up in Michelin’s facilities of Clermont-Ferrant. It was hoped the first dozen would be delivered in December of 1940, with 25 to be manufactured in January of 1941, 40 in February, 70 in March, 100 in April, and 150 monthly from May 1941 onward. This obviously never materialized. As it was never flown, there is no good way to estimate the VG.32’s performance. The Allison engine reportedly required lengthening the engine cover by 42 cm and may have made the plane somewhat heavier, but its significantly higher power output may still have resulted in the VG.32 being at least comparable, if not somewhat superior to the VG.33.

A rear view of the first VG.33 derivative to take flight, the VG.34, parked aside a LeO 451 bomber on a French airfield. [Aviafrance]
The first VG.33 derivative to take flight would be the VG.34. Built using the second VG.33 prototype airframe (VG.33-02), the VG.34 mounted a more powerful version of the Hispano-Suiza 12Y engine, the 12Y-45. Producing 960 hp, this was enough to give the VG.34 a maximum speed of 576 km/h at 6,000 m, and likely improve upon its climb rate as well. The VG.34 had its first flight on the 20th of January 1940. It appears to have been at an airfield near Toulouse by the armistice, with its further fate unknown.

The VG.35, made from VG.33-04, received a Hispano-Suiza 12Y-51 engine producing 1,000 hp. Sadly, it is a lot more elusive than the VG.34. Its recorded performances do not appear to be known, nor do any photo survive, despite the VG.35 having its first flight on the 25th of February 1940. The plane was known to be in Orléans by the point German forces captured the city. Its further fate is unknown.

A front view of the fairly impressive-looking VG.36 prototype. [Old Machine Press]
The VG.36 could be said to be a more mature version of the VG.35. Using the same 12Y-51 engine, the VG.36 was not built from a converted VG.33 airframe, but instead had a new one, incorporating a number of changes. Its radiator was wider but presented a smaller profile, and was more integrated into the fuselage in an effort to reduce drag. Taking its first flight on the 14th of May 1940, the VG.39 could reach 590 km/h at 7,000 m. Very satisfying in terms of its performance, it appears to have been scheduled to replace the VG.33 on the production lines at some point. As for the prototype, it was reportedly withdrawn to an airfield in La-Roche-Sur-Yon during the campaign, before being destroyed to avoid capture.

The VG.37 was never built; a further development of the VG.36, it was to feature a supercharger and be modified for long-range operations. The VG.38 was never built either, and was to feature an improved version of the 12Y engine – the exact model being unknown.

The sleek and impressive looking VG.39, often considered to be the most brilliant example of the future of French fighter design to have reached prototype stage by 1940, parked in front of a LeO 451 bomber. [ww2.sas1946.com]
The VG.39 was the most advanced model which took flight. Its main improvement was in terms of its powerplant. It received the advanced Hispano-Suiza 12Y-89 ter, with an output of 1,200 hp. It appears this engine did not allow for a cannon firing through the propeller hub in this version. To somewhat compensate for this, the wings were redesigned, keeping the same surface area but having a vastly modified structure which enabled for the mounting of one additional MAC34 machine-gun in each wing. Taking its first flight on the 3rd of May 1940, it could reach an impressive 625 km/h at 5,750 m. A very well performing plane for the time, the VG.39 was, as the VG.36, intended to enter production. This would, however, likely have been in the form of an improved version still on the drawing board by 1940. Designated as the VG.39bis, this improved VG.39 would feature an even more powerful Hispano-Suiza 12Z-17 engine producing 1,600 hp and allow for a 20 mm HS-404 to fire through the propeller hub, with the 6 wing machine-guns being retained. The VG.39bis would also incorporate a lower and widened radiator design similar to the one found in the VG.36. It would likely have been a very high performing aircraft, but it stayed on the drawing board due to the German occupation of France. As for the VG.39 prototype, its eventual fate is unknown.

The Undying Shadow of a Promising Fighter: Vichy Regime Studies

As can be seen, the VG.33 was an aircraft with promising performance, and an already well-developed series of variants which would have guaranteed the aircraft good evolutionary potential. Had France not been knocked out of the war by 1940, it is likely the Arsenal VG.3X series would have become for France what the Spitfire was to Britain or the Bf.109 to Germany: a mainstay able to continue to evolve and remain relevant for pretty much the entirety of the conflict.

This promising future was cut short by German wings, tracks and feet occupying France in 1940. Nonetheless, the armistice regime known as Vichy continued some studies upon the base of the VG.33. A few of the fighters, seemingly five production models as well as the original prototype, were indeed re-located in the unoccupied part of France at the end of the 1940 campaign. Though they were not put into service, they appear to have been taken as a basis to continue working on future fighters.

A series of profile views of Arsenal’s series of fighters. There is little in common to be found between the original VG.30 or VG.33 and the later VG.50 or VG.70 projects undertaken by the Vichy regime. [le Fana de l’Aviation n°199]
Under the Vichy regime, studies would continue, leading to the VG.40, 50 and then VG.60. The definitive aircraft designed by 1942 would have featured larger 16.25 m² wings, and a completely redesigned fuselage which had little to do with the old VG.33. It would feature a new version of the Hispano-Suiza 12Z engine. Studies stopped after the occupation of the unoccupied part of France in November of 1942, but would resume after the liberation of France, with a VG.60 fitted with a German Jumo 213E 1,750 hp engine being considered. This would have been a fighter vastly different from the original VG.33. Armed with eight wing-mounted M2 Browning 12.7 mm machine-guns and a cannon of unknown model firing through the propeller hub, it would have weighed up to around five tons and was expected to reach over 700 km/h. This would never materialize, as Arsenal would end up manufacturing a version of a pre-war project in the form of the tandem engine VB.10. The design bureau would also design some jet fighters in the form of the VG.70 and VG.90, though these would not result in any Arsenal aircraft being adopted by France before the bureau was absorbed into the larger SNCAN in December of 1954.

A Fighter Mystified and Fantasized-About, Cut Short by France’s Defeat

The Arsenal VG.33 was a particularly interesting French piece of equipment. Having its roots in a venture by Arsenal de L’Aéronautique to design the VG. 30 light fighter, the type would evolve into a solid fighter by 1939-1940. Having both promising performance and evolutionary potential, the VG.33’s future was cut short by the German invasion which happened right as the very first production aircraft were taking their first flights. Even more so than the D.520, often described by this sentence, the VG.33 arrived too few and too late, and couldn’t provide the French air force an aircraft able to compete with Germany’s Bf.109 . It has since become a fairly mystified piece of French engineering. An elegant fighter with a sleek design, it has become a sort of ambassador for the large variety of advanced military equipment which France was to field by 1940, but never got the chance. In this fashion, it is not too different from the Somua S40 and B1 Ter tanks or MAS 40 rifle in the psyche of French military enthusiasts.

Two production VG.33s on a French airfield. The majestic and sleek fighter design that is the VG.33 has attracted the eyes of many French military enthusiasts for decades. Though the reality is somewhat more complex, it is certain the VG.33 would have provided the French air force with a better performing asset than the MS.406, MB.152, and even D.520 and H.75. [Old Machine Press]

Replica Construction

This heavily mystified status of the VG.33 likely played a role in the creation of a project to produce a replica of the French fighter aircraft. An association, Arsenal Sud Restoration, was created with the goal of building a replica. With the original plans unavailable, the team had to recreate them using new tools. As of November 2020, while far from complete, the shape of the replica’s fuselage is starting to take shape, while the rudder has been painted and given its markings.

A view of the state of the project in October of 2020 [Facebook]

Variants

VG.30: Original light fighter prototype

VG.31: Planned modified variant of the VG.30, with Hispano-Suiza 12Y-31 860 hp engine, radiator moved to the back, and only two 7.5mm machine-guns. Never flown, a fuselage built and converted to a VG.33 prototype

VG.32: Planned variant fitted with Allison V-1710-C15 1,150 hp engine. A VG.33 prototype fuselage was set aside to receive the engine and serve as the VG.32 prototype, but it had not yet been mounted in June of 1940. Production was scheduled to begin in December 1940.

VG.33: Main production variant, using the Hispano-Suiza 12Y-31 860 hp engine and armed with one 20mm HS-404 autocannon and four 7.5mm MAC 34 machine-guns.

VG.34: Prototype converted from the second VG.33 prototype airframe, using the Hispano-Suiza 12Y-45 engine producing 960hp.

VG.35: Prototype converted from the fourth VG.33 prototype airframe, fitted with the Hispano-Suiza 12Y-51 1,000hp engine.

VG.36: Prototype, an improved iteration of the VG.30 series with the 12Y-51 engine in a modified airframe, with a radiator designed to reduce drag and significant other changes. Was to replace the VG.33 on the production lines at some point

VG.37:Planned variant of the VG.36 fitted with a supercharger and optimized for longer-range operations, never built

VG.38: Fighter design with an unknown iteration of the 12Y family of engines, never built.

VG.39: Prototype using the Hispano-Suiza 12Y-89 ter, producing 1,200hp but not fitted with an engine cannon, and instead using six 7.5mm machine-guns instead of four.

VG.39bis: Further evolution of the VG.39, powered by the Hispano-Suiza 12Z-17 1,600hp engine which would allow for a 20mm firing through the engine, while retaining six 7.5mm machine-guns. Never built

VG.40: First variant studied under the Vichy regime, using a Roll-Royces Merlin III 1,030hp engine on an airframe based on the VG.39bis. Never built

VG.50: Variant studied under the Vichy regime, using the Allison V-1710-39 engine. Never built

VG.60: Variant studied under the Vichy regime, with a new version of the Hispano-Suiza 12Z series of engines. Never built.

Arsenal VG.33 Specifications

Wingspan 10.8 m / 35 ft 6 in
Length 8.55 m / 28 ft 1 in
Height 3.55 m / 11 ft 8 in
Wing Area 14 m² / 46 ft² (One Wing)
28 m² / 92 ft² (Total)
Engine Hispano-Suiza 12Y-31
Engine Output Take Off – 760 hp
Optimal Altitude – 860 hp at 5,200 m / 17,000 ftMax RPM –  ~1,850 Standard
Propeller Three-bladed Chauvière Variable Pitch Propeller (2.95 m diameter) 
Empty Weight 2,050 kg / 4,519 lb
Takeoff Weight 2,450 to 2,896 kg (2,680 kg standard)
5,400 to 6,385 lb (5,908 lb standard)
Wing Loading 95.7 kg/m²  /  19.6 lb/ft² (at standard 2,680 kg weight)
Fuel Capacity 400 liters / 105 US gallons           
600 liters / 158 US gallons with proposed additional non-droppable fuel tanks
Maximum Speed  558 km/h / 347 mph
Cruising Speed 385 km/h / 239 mph
Cruising Range 1,060 km / 620 mi with Standard 400 liter fuel load

1,560 km / 970 mi with Extended 600 liter fuel load

Endurance 2h40 at 5,000m with 400 liter fuel load

4h20 at 5,000m with 600 liter fuel load

Maximum Service Ceiling 9,500 m / 31,000 ft
Time to Altitude 1.17 minutes to 1,000 m

2.34 minutes to 2,000 m

3.51 minutes to 3,000 m

5.07 minutes to 4,000 m

6.26 minutes to 5,000 m

8.02 minutes to 6,000 m

10.11 minutes to 7,000 m

13.26 minutes to 8,000 m

Crew One Pilot
Armament
  • 20 mm HS-404 firing through the propeller hub center with 60 rounds
  • 4x MAC34M39 machine-guns with 850 rounds per gun in the wings
Production
  • 1 prototype + 4 completed derivative prototype
  • Around 20 production aircraft fully completed of which 7 were taken in by the French Air Force
  • 40 airframes very close to completion
  • About 200 aircraft in various stages of production in total by June of 1940 

Gallery

Arsenal VG.30 Prototype
Arsenal VG.33 Prototype
Arsenal VG.33 in Standard Camouflage for 1940
German Captured VG.33 – Depicted as seen in testing at Rechlin

Sources

  • Written by Marisa Belhote
  • Edited by Stan and Henry H.
  • Illustrations by Ed Jackson
  • Le Fana de l’Aviation, Jean Cuny & Raymond Danel, 1986:
  • N°197 : “Les Chasseurs Arsenal VG 30 à VG 70” (I)
  • N°198 : “Les Chasseurs Arsenal VG 30 à VG 70” (II)
  • N°199 : “Les Chasseurs Arsenal VG 30 à VG 70” (III)
  • L’Aviation Française, chasse, bombardement, reconnaissance et observation 1939-1942, Dominique Breffort, Histoire & Collection Editions, 2011
  • L’Arsenal de L’Aéronautique, Gérard Hartmann for hydroretro.net, February 2007
  • William Pearce for old.machinepress.com: https://oldmachinepress.com/2019/03/05/arsenal-vg-30-series-vg-33-fighter-aircraft/
  • https://www.facebook.com/ArsenalVG33/