Tag Archives: destroyer

Focke Wulf Fw 187

Nazi flag Nazi Germany (1937)
Twin Engined Fighter – 9 Built

The Fw 187 Falke was a twin engine fighter that was built by Focke-Wulf in 1936, at a time when the newly-formed Luftwaffe did not consider such an airplane type necessary. Despite receiving significant negative feedback, several prototypes were built and three pre-production versions were also constructed. The three pre-production types saw limited service defending the Focke-Wulf factory in Bremen against Allied bombing in 1940. Aside from that, they saw no other combat.

History

The first Fw 187 V1 shortly after being completed.

The twin-engined fighter was a concept few countries pursued in the early days of flight. The type only started serious development in the years directly preceding the outbreak of the Second World War, with planes such as the American Lockheed P-38 Lightning entering service. Most officials across the globe agreed that two-engine fighter aircraft would be rendered unnecessary by cheaper and lighter single-engine designs. In the early 1930s, Germany had no plans to develop such an aircraft either.

However, an aeronautical engineer by the name of Kurt Tank showed an interest. Kurt Tank was the main aircraft designer of the Focke-Wulf company, who developed most of the company’s most famous aircraft. During WWII, he would go on to create the iconic Fw 190 and would later have an aircraft designation named after him, with the Ta 152 and Ta 154. He began work on the new twin-engine project, despite there being no current requirement for such an aircraft. Tank had his first chance to reveal his design at a weapons exhibition held at a Henschel plant in 1936. Tank showed off his innovative design, claiming the twin-engine layout would offer a great speed of 348 mph (560 km/h) if the aircraft mounted the newly developed Daimler Benz DB 600 engines. One of the attendants of the event was Adolf Hitler himself, who found the design particularly interesting.

The Fw 187 on jackstands. This photo was taken during testing of the double-wheeled landing gear.

But to the Technischen Amt (Technical Research Office), the design was unnecessary, as it was believed single-engine designs could perform just as well as the twin-engined concept. Another pre-war doctrine was that the current bombers would be fast enough to outrun the fighters of the enemy, and escort fighters wouldn’t be needed. Tank, not happy with this response, took his design to Oberst (Colonel) Wolfram von Richthofen, the head of the Development section of the Technischen Amt. Tank persuaded him that technological advances would eventually allow the construction of more powerful fighters that would be able to catch up with the bombers which would thus require an escort fighter. Convinced by his claim, Richthofen agreed that it would be better to have a countermeasure now rather than later. Richthofen’s term as chief was short, but in this time he authorized three prototypes of Tank’s twin-engine design. The design was officially given the name of Fw 187.

Work began on the Fw 187 soon after, but, to Tank’s dismay, the requests for the DB 600 engine were turned down. Instead, he had to work with Junkers Jumo 210 engines, as DB 600s were only allocated to projects which were viewed as being highly important. The design work was handed over to Oberingenieur (Chief Engineer) Rudi Blaser, who was the one of the most experienced members onboard Focke-Wulf. Blaser had previously headed the design of the failed Fw 159 monoplane fighter, but he was ready to continue work and move on from his failure. Blaser wanted to achieve only one thing with this design: maximum speed.

The Fw 187 V2 on a test flight.

The first prototype Fw 187 was completed in early 1937. The Fw 187 V1 (designated D-AANA) was first flown by test pilot Hans Sander. In the initial flights, the aircraft reached speeds of up to 326 mph (524 km/h). The Luftwaffe was surprised to learn that despite weighing twice as much as the Bf 109, the Fw 187 was still able to go 50 mph (80 km/h) faster. They accused the team of having faulty instruments. Blaser was determined to prove them wrong and had a Pitot tube (a device that measures air speed using the total air pressure) installed on the nose of the V1, which would accurately tell the performance. Sander once again flew and confirmed the aircraft indeed had attained such a speed. Further flight trials showed the aircraft had superb maneuverability, climbing and diving. These great characteristics led Kurt Tank to name the aircraft his “Falke” or Falcon. This name became official as well, and wasn’t just a nickname the creator gave to his creation.

In the summer of 1937, the airframe had an impressive wing loading of 30.72 Ibs/sq ft (147.7 kg/m2), something no other fighter could equal at that point. Further tests by Sander put the airframe to the extremes to try the limitations of the aircraft in diving. The rudder, during dives, was predicted to begin fluttering after 620 mph (1000 km/h), but Blaser was more cautious, and thought it would start at a lower speed. To counteract this, a balance weight was attached to the rudder. Blaser assured Sander that the aircraft would perform better in dives as long as he didn’t exceed 460 mph (740 km/h). With the new weight attached, Sander took off to begin trials. Hitting 455 mph (730 km/h), Sander noticed the tail had begun violently shaking. With the tail not responding, Sander had started to bail when he reported a loud noise came from the rear. Sander’s control over the aircraft had returned and all vibrations had ceased. Upon landing, it was found that the weight itself had been the culprit of the vibrations and the sound Sander heard was the weight breaking off the rudder.

An aft view of the V6. The surface cooling system is visible in this shot.

Several modifications were made to the V1 during testing. The frontal landing gear was switched out for a dual wheeled design at some point, but was found it offered no benefit over the single wheel and thus was reverted. The propellers were also changed from Junkers-Hamilton to VDM built ones. Weapons were eventually added as well, but these were just two 7.92mm MG 17s. The 2nd prototype arrived in the summer of 1937. Visually, the V2 was identical to the V1, but had a smaller tailwheel, modified control surfaces, and Jumo 210G engines with enhanced fixed radiators.

However, in 1936, there was a change of leadership in the Technischen Amt. The supportive Richthofen was replaced by Ernst Udet. Udet was a fighter pilot, and his experience reflected upon his decisions. He made sure no more biplane designs were being built and all designs were now of monoplane construction. He had a major focus on fighters, and believed them to be the future. The modern fighter had to be efficient, with speed and maneuverability being the utmost importance. And, from this viewpoint, he saw twin engine fighters as not being as capable as single engine fighters. With this mindset, the Luftwaffe now saw no real reason to continue developing the Fw 187 as a single seat interceptor, but it could be developed as a Zerstörer (“Destroyer” heavy fighter), the same role the Bf 110 occupied. This required a crew of more than one and much heavier armament. Tank was reluctant, and felt his design was still as capable as single engine designs were, but he knew continuing to go against the Technischen Amt would result in his aircraft being terminated, so he regretfully obliged.

The V3 was in the middle of construction and changes had to be made as a result of this. The V1 and V2 had already been produced, and any drastic changes would further affect development, so no attempt to convert the two initial planes into two-seaters ever occured. To accommodate a radioman, the cockpit had to be lengthened. This worried Blaser, who was concerned these changes would affect the size and overall performance of the aircraft. Thus, he tried making the changes that affected the aircraft’s performance as little as possible. The fuselage was increased lengthwise, the tailfin was shortened, and increased cockpit volume demanded the fuel tank be moved farther back. Engine nacelles were also shortened to allow installation of landing flaps for when the aircraft carried larger ordnance. The 7.92mms were now complemented with two 20mm MG FF cannons, although V3 never mounted any actual weapons, only mock-ups.

The Fw 187 had good luck up until this point, but this good fortune ran out shortly after the V3 was produced. A few weeks after it was finished in early 1938, the V3 was doing a test flight when one of its engines caught on fire. The aircraft was able to safely land and the fire was extinguished, but the airframe had taken some damage and needed repairs. Tragedy struck once again not too long after, on May 14th. The V1 was lost and its pilot, Bauer, was killed during a landing accident. These two events happening so close together made the already negatively viewed Falke seem not only an unnecessary weapon, but now an unreliable one as well. Two more prototypes were built late in 1938, the V4 (D-OSNP) and V5 (D-OTGN). These two were mostly identical to the V3, but had several slight modifications, such as a modified windshield. Judging by photos, one obvious trait V4 and V5 had over V3 is the lack of the radio mast mounted on the cockpit of the V3. V4 and V5 were sent to the Echlin Erprobungsstelle, a major aircraft development and testing airfield for the RLM (Reichsluftfahrtministerium, German Ministry of Aviation). The trials at this site yielded favorable evaluations of the aircraft and three pre-production examples were ordered.

One of the A-0s flying overhead.

While all of this was going on, Tank was finally able to acquire two DB 600A engines for his Falke. The plane that mounted these engines would be the V6. Before the V6 was built, Tank had shown interest in surface evaporation cooling, a drag reducing novelty which had been researched and developed by Heinkel and was soon to be worked on by Messerschmitt. With the V6 now under construction, Tank drew plans to apply the feature into the prototype to give it peak performance. V6 (CI+NY) first flew in early 1939 and showed how well the new engines and surface cooling made the aircraft perform. On takeoff, the V6 had 1,000 HP from each engine, a 43% boost over the previously used Jumo 210s. During one test flight, the V6 was flying 395 mph (635 km/h) in level flight.

The three pre-production examples previously mentioned were designated Fw 197A-0. These were were fully armed. The A-0s added armored glass to the windshield and carried two more MG 17s. The A-0 planes also returned to using the Jumo 210 engines. Due to the additional weight, the performance of the A-0s was a bit lower than the prototypes. However, the RLM continued to argue against the Falke, claiming that, because it had no defensive armament, the Fw wouldn’t be as effective as the Bf 110 in the same role (despite it being able to outperform the 110 performance-wise). The final decision related to the Falke was an idea to turn it into a night-fighter in 1943. Nothing ever came out of this proposal.

The Factory Defender

Although the Bf 110 seemingly took the Falke’s place, its story continued. As the Royal Air Force (RAF) began its attacks over mainland Germany in 1940, aircraft firms scrambled to defend their valuable factories. Several firms formed a “Industrie Schutzstaffel”, which was an aerial defence program which would have aircraft company’s factories and testing sites be defended by aircraft piloted by test pilots and to be managed by on-site personnel. Focke-Wulf was one such firm and, luckily for them, three fully operational Fw187A-0s were ready and waiting to be used in combat. These examples were sent to the Focke-Wulf factory at Bremen and were sent on numerous missions to defend the plant from Allied bombing. Allegedly, Dipl.-Ing (Engineer’s degree) Melhorn claimed several kills while flying one of these aircraft. After the stint in Bremen, the three were put back into armament and equipment testing. In the winter of 1940 to early 1941, the three were sent to a Jagdstaffel unit in Norway, where they were evaluated by pilots. One of the three was sent to Værløse, Denmark in the summer of 1942 and temporarily assigned to Luftschiess-Schule. It is likely the remaining 3 and prototypes were either scrapped or destroyed by Allied bombing, as no examples are known to have survived the war. Some sources claim the aircraft Melhorn flew was the V6 converted into a single seater and armed for combat, but no proof supports this.

The Fw 187 was no secret weapon. After the fighting in France died down, the Propaganda Ministry began producing film and photos of the Fw 187 in 1940-1941 to persuade the Allies into thinking the Falke was fully operational and replacing the Bf 110 as the Luftwaffe’s all new Zerstörer. In reality, the latter was taking over the role of the former. The campaign sort of worked, as the Fw 187 was now a part of the rogue’s gallery that the Allies expected to fight. Identification cards, models and even movies were made to train pilots in the event they should encounter the two engine terror in combat. One such film denotes that the Fw 187 is “a rare bird” and that they should comically “make it extinct”. This shows that the Allies didn’t completely fall for the propaganda that claimed it was being produced in mass quantity.

Design

The Fw 187 had a twin engine design. The airframe was of all light metal construction. To reduce drag, the airframe was actually narrower at its widest point than other fighters of the time. The wings were of metal construction and divided into three sections. The connected segments carried the fuel and the outer segments had the flaps installed. The first and second prototypes had a single seat cockpit. The cockpit was covered by a canopy that slid aft. The cockpit itself wasn’t built for comfort, as it was built for an average sized pilot. The cramped cockpit lacked the necessary space to mount certain instruments and had these mounted outside on the engine cowlings. V1 had tail sitting landing gear, with all three wheels being able to retract into the hull. V2 was similar to V1, but had modified control surfaces. Beginning after the first two, all examples of the Fw 187 had an extended greenhouse cockpit to accommodate the radioman. The cockpit now opened up in two sections, one to the front and one to the rear. The fuselage was lengthened to some degree as well. The extended cockpit required the fuel tank to be moved down the fuselage. The engine nacelles were shortened to allow landing flaps to be added. V3 also had a radio mast mounted on the rear part of the cockpit. V4 and V5 had this removed.

For engines, the majority of the Falke’s used the Jumo 210 engine. V1 mounted the 210Da, V2-V5 using the 210G, V6 using the powerful DB 600A engines and the A-0 reverting back to 210Gs. The aircraft performance stayed the same overall, with the V6 having peak performance speedwise.

For armament, V1 mounted two MG 17 machine guns. V3 had accommodations for two more MG FF cannons but only mockups were added. When the A-0s were rolled out, an additional two MG 17s were added to fill the Zerstorer role. The extra two had their ammunition mounted in front of the radioman’s seat.

Variants

  • Fw 187 V1 – First prototype. Mounted two Junkers Jumo 210Da engines. Originally mounted Junkers-Hamilton propellers but was changed to VDM airscrews. Originally had two wheeled forward landing gear which was switched to single during development. Fitted with two MG 17 machine guns.
  • Fw 187 V2 – Second prototype, had different rudders and a semi-retractable tail-wheel. Had fuel-injection Jumo 210G engines.
  • Fw 187 V3 – Third prototype. Two seat version, the cockpit was lengthened to accommodate the radioman. The engine nacelles were shortened some degree to allow new landing flaps.V-3 also mounted two MG 17 machine guns and two MG FF cannons.
  • Fw 187 V4/Fw 187 V5 – Fourth and fifth prototypes. Nearly identical to V-3, aside from several small modifications, such as having different windscreens.
  • Fw 187 V-6 – Sixth prototype. High speed version that mounted Daimler Benz DB 600A engines.
  • Fw 187A-0 – Pre-production version. Three were constructed. Armed with two MG FF cannons and four MG 17 machine guns. Frontal armored windshields were added. These three were tested and sent to various locations for trial and defensive purposes.

Operators

  • Nazi Germany – The sole operator was Nazi Germany, which reportedly used the Falke during the air defense of Bremen in 1940.

Focke Wulf Fw 187A-0 Specifications

Wingspan 50 ft 2 in / 15.3 m
Length 36 ft 6 in / 11.1 m
Height 12 ft 7 in / 3.8 m
Wing Area 327.2 ft² / 99.7 m²
Engine 2x 700 hp (522 kW) Junkers Jumo 210Ga 12-cylinder liquid cooled inline engines
Propeller 2x 3-blade VDM airscrews
Powerplant Ratings
Horsepower output Altitude
Take Off 700 hp Sea Level
Normal 730 hp 3,280 ft
Weights
Empty 8,150 lbs / 3,700 kg
Loaded 11,000 lbs / 5,000 kg
Climb Rate
Rate of Climb at Sea Level 3,450 ft / 1050 m per minute
Time to 6,560 ft / 1999.4 m 1.9 minutes
Time to 19,700 ft / 6000 m 5.8 minutes
Speed 329 mph / 530 km/h at 13,780 ft / 4,200 m

322 mph / 518 km/h at Sea Level

Range 560 mi / 900 km
Maximum Service Ceiling 32,810 ft / 10940 m
Crew 1 Pilot

1 Radio Operator

Armament
  • 2x 20mm MG FF cannons
  • 4x 7.92mm MG 17 machine guns

Gallery

llustrations by Ed Jackson www.artbyedo.com

Fw 187V2 – The second single-seat prototype with a large curved canopy
Fw 187V3 – Two seat cockpit and canopy design were established along with new engines and nacelles
Fw 187V4 – Curved windscreen was fitted, however this change would not last
Fw 187V5 – Two more MG-17 added below the canopy
Fw 187A-0 – The A series was the first and only production batch
The V5 on standby. A visual difference between the V3 and the V4/V5 is the absence of a radio mast mounted on the cockpit.
Side view of the V6.
A period 3-way illustration of the Fw 187 A-0
The Fw 187 V3 after it’s engine fire. Notice it’s greenhouse cockpit and the way it opens.
A cockpit view of one of the A-0s. Note the glass floor.
The V4 taking off. The V4 and V5 were slightly modified versions of the V3.
Three pre-production Fw 187 A-0s on standby.
An aft view of the V6. The surface cooling system is visible in this shot.

Sources