Messerschmitt Me 163A Komet

Nazi flag Nazi Germany (1943)
Rocket Powered Fighter – 10 Built

The first operational Me 163 prototype. [luftwaffephotos.com]
During the Second World War, the Luftwaffe experimented with a number of unorthodox designs. This included a handful of rocket-powered aircraft, like the Me 163. This particular aircraft was created thanks to the somewhat unexpected combination of two different projects. One was the airframe designed by Alexander Martin Lippisch, and the second was the rocket engine developed by Helmuth Walter. Following the testing of the first prototypes, a small series of some 10 aircraft were built that were mainly used for testing and training.

Alexander Martin Lippisch and Helmuth Walter

The history of Me 163 was closely related to the work and design of aircraft engineer Alexander Martin Lippisch and rocket development pioneer Helmuth Walter. Lippisch was somewhat unorthodox in his aircraft design work, to say the least. He was quite interested in the development of gliders and later aircraft that were either completely lacking a tail unit or of an all-wing configuration.

In 1921, Lippisch, together with a colleague, participated in the formation of the so-called Weltensegler GmbH (World Glider Ltd.) company. At that time, the Germans were prohibited from developing and building military aircraft. The Germans worked around this prohibition by instead focusing on gliders and civilian aircraft which if needed would be quickly converted for military use, and conducted secret experiments. While glider development may seem like a waste of effort, it actually provided the Germans with an excellent foundation on which they managed to develop the Luftwaffe during the 1930s, becoming a formidable force at the start of the war. In 1925, Lippisch joined Rhön Rossitten Gesellschaft RRG, where he soon began working on his first glider. It was named Storch I, and incorporated his unusual all-wing design.

Over the years, Lippisch also became interested in rocket technology. With assistance from Fritz von Opel, Lippisch managed to build a rocket-assisted glider. This contraption was flight tested in June 1928. This was actually the first-ever rocket-assisted flight in the world. While initially successful, the glider crash-landed, and caught fire. The plane would be lost in the accident.

This accident did not prevent Lippisch from experimenting with rocket-powered all-wing gliders. He focused his work on a powered version of his Storch V glider. For this project, he used an 8 hp DKW engine. His work was successful and he managed to find investors who were willing to provide funds for the project. This led to the development of the Delta I all-wing aircraft during the late 1920s, and it was followed by Delta II, III, and IV.

Lippisch Delta I prototype. [aviastar.org]
Following this, Lippisch joined the Deutsche Forschungsinstitut DFS, where he worked as an engineer. There, he developed a series of new glider designs, like the DFS 40. In 1938, the work of Helmuth Walter came to his attention. Walter was a young scientist who was highly interested in rocket propulsion. He managed to gain military funding, which greatly helped in his work. In 1937, he even managed to gain attention from the Reichsluftfahrtministerium RLM (German Air Ministry). The RLM formed a Sondertriebwerke (Special Propulsion System Department) with the aim of experimenting with rocket engines in the aircraft industry. While this department was mainly focused on developing rocket engines for short take-off assistance, Walter desired a more prominent role in rocket propulsion. He intended to develop a rocket engine that could replace standard piston engines. Walter managed to develop such an engine, named Walter TP-1, which was fueled by the so-called ‘T-Stoff’ (hydrogen peroxide) and ‘Z-Stoff’ (water solution of either calcium or sodium permanganate). His engine design would be tested in 1939 on the He 176. However, the final results were disappointing and the engine did not go into production.

The DFS 194 predecessor

Lippisch and his design team began working on a new project incorporating the Walter rocket engine. Initially, the project was designated simply as Entwurf X (Design X), before being changed to 8-194 and finally DFS 194. Work on the prototype came to a temporary halt as the DFS lacked proper production capabilities to finish the aircraft. To keep the project going, the RLM instructed Messerschmitt to provide the necessary manpower and production support.

Given the small chance of progression in the DFS and in order to increase the speed of the project, Lippisch and his team moved to Messerschmitt’s base at Augsburg at the start of 1939. He also tried to negotiate with Heinkel for the production and development of the DFS 194 project, but nothing came of this. At Augsburg, Lippisch and his team worked in Messerschmitt’s newly formed Department L (which stands for Lippisch).

The DFS 194 prototype served as the base for the future Me 163. [nevingtonwarmuseum.com]
The first calculations were promising, as the plane would be able to reach a speed of 550 km/h (342 mph). Once completed the DFS 194, was transported to the secret German rocket test center at Peenemunde-West Airfield during the summer of 1939. During ground tests, it was noted that the engine installation was poorly designed and too dangerous to be actually flight tested. Instead, it was decided to use the design as a glider. Surprisingly, despite this huge setback, production orders for three prototypes were given. Initially, these were designated simply as Lippisch V1, V2, and V3, but would be renamed to Me 163A V1 to V3. This was mainly done to mask the true purpose of this aircraft, as this was the name given to an older, rejected Bf 163 Messerschmitt reconnaissance aircraft project.

The Me 163A Prototype Series

The RLM was not satisfied with the general design of the engine compartment initially tested on the DFS 194. They requested that for further Me 163 development, it would need to be substantially changed. In addition, the engine was to be replaced with the Walter R II-203 engine. This engine was to have a manually regulated thrust ranging from 150-750 kg of thrust (330-1,650 lbs). The engine compartment was also to be completely redesigned in order to have easy access to the main components for maintenance.

Following the start of the Second World War in September 1939, the work on the Me 163 slowed down but still went on. The first unpowered flight by the Me 163 V1 prototype, in some sources marked as V4, (KE + SW) was carried out during early 1941. This prototype was towed by a Bf 110 heavy fighter. Once at a sufficient altitude, the V1 was released. During the test flight, the pilot, Heini Dittmar, managed to reach a speed of some 850 km/h (528 mph) during a dive. While this was a great starting point for the project, Hitler, following military victories in Poland and in the West, ordered that funds for such projects be reduced. In the case of the Me 163, this meant that only two more additional prototypes were to be built.

Side view of the Me 163 V1 (V4).[luftwaffephotos.com]
In May 1941, a wooden mock-up of a Me 163 was completed, which was then transported to the Walter Werke. Once there, it was to be equipped with the R II-203 engine. Once the first prototype was fully completed and equipped with this engine, the first tests were carried out at Peenemunde-West in August 1941. The test pilot was once again Heini Dittmar. After a series of test flights that lasted from August to September 1941, the Me 163 prototype showed promising results. The pilot managed to reach top speeds of 800 km/h (500 mph). At this time, the second V2 prototype was also equipped with a rocket engine and used in various test flights. Ernst Udet, Director-General of the Luftwaffe, was highly impressed with its performance. He even gave orders that an additional 8 prototypes were to be built, bringing the total to 13 at this time.

Once the prototype was equipped with the R II-203 engine, the first tests were carried out in August 1941. These proved to be highly successful, which led to an increase in interest for the Me 163 project. [Spate & Bateson]
At the start of October, Heini Dittmar said that, in order to fully test the Me 163’s flying performance, the fuel load had to be increased. On his personal insistence, the V3 (CD + IM) prototype, was fully fueled. This is according to W. Spate and R. P. Bateson (Messerschmitt Me 163 Komet). Other sources like M. Griehl (X-Planes German Luftwaffe Prototypes 1930-1945) this aircraft was described as being the V8 prototype instead. On the 2nd of October 1941, he took to the sky, initially towed by a Bf 110. At an altitude of 3,960 meters (13,000 ft), Dittmar activated the engine. After reaching a speed of 965 km/h (600 mph), he lost control of the aircraft as the result of compressibility effects. The prototype began a rapid descent toward the ground. He then switched off the engine, which enabled him to regain control, after which he landed safely on the ground. Later analysis of the flight indicated that Dittmar managed to reach a speed of 1002 km/h (623 mph). As the whole project was undertaken under great secrecy, this success was not published at the time.

The Me 163 in the middle was the aircraft that Heini Dittmar flew when he reached a speed of 1002 km/h (623 mph). [Spate & Bateson]
Following these events, the Me 163 project got a temporary boost in prominence, with Herman Goring himself placing great interest in it. Ernst Udet additionally placed an order for 70 new Me 163 airframes together with engines for the B version in October 1941. A month later, things changed dramatically for Me 163 after Udet committed suicide. His replacement, Erhard Milch, was less interested in unconventional aircraft designs, like the Me 163. Work on the project nevertheless continued.

A breakup with Messerschmitt

While the Me 163 project was underway, relations soured between Willy Messerschmitt and Lippisch. Messerschmitt personally disliked the Me 163, partly due to its unique overall design, but also given that he was not involved in its development. By 1943, Lippisch left Augsburg and moved to Vienna. While not physically present in the design bureau, he tried to maintain contact with the Me 163 development team at a distance.

In the meantime, Messerschmitt was unwilling to be involved in the Me 163 project, under the excuse that his company was already overburdened with the production of other aircraft. For this reason, the production of further Me 163 aircraft was instead given to Klemm Leichtflugzeugbau, a relatively small aircraft company owned by Hans Klemm.

Production of the A-0 series

While the V1 prototype was mainly used for initial testing, the V2 would serve as a base for the A-0 series. An initial order for ten A-0 aircraft was previously given to Messerschmitt, but only seven were completed. The remaining three aircraft were actually completed by the Klemm factory. These were all completed from 1941 to 1942. The number of prototypes built is not clear in the sources. The numbers range from 1 to 8 prototype aircraft. According to S. Ransom and H.H. Cammann (Jagdgeschwader 400), while three prototypes were meant to be built initially, not all met the requested specifications, except one, which received the V4 designation. Author M. Griehl (Jet Planes of the Third Reich) on the other hand noted that the V4 was the first prototype. He explained that the previous three prototypes were actually related to the initial Bf 163 reconnaissance project that was rejected.

In-Service

Of the 10 built Me 163 A-0 planes, not all were equipped with fully operational engines. A number of them were instead operated as unpowered gliders. This version was not intended for combat operations and was mainly used for crew training and further experimentation.

At the end of November 1943, the V6 aircraft was lost in an accident with the loss of the pilot. In another accident at the end of 1943, another pilot died when the engine stopped working during a takeoff. While the pilot tried to turn back for a landing, having limited control, the aircraft hit a ground station radio antenna before hitting the ground and exploding. It was discovered in an investigation that the undercarriage dolly bounced off the ground much higher than usual, and struck the aircraft, damaging the rocket engine. Some prominent pilots, like Hanna Reitsch, actually had the chance to flight-test the Me 163 aircraft. At least one aircraft was still operational by February 1945 and was used for testing the 55 mm R4M rockets by Erprobungkommando 16.

Me 163A at Peenemunde, 1943. [Ransom & Cammann]
At least one Me 163A survived up to February 1945. It was used by Erprobungkommando 16 (Eng. testing or evaluation-coomand) in Silesia to test the 55 mm R4M rockets. This unit had the primary function of testing and examining the newly built Me 163 and helping in the development and improvement of its overall design. Besides these, no other armament was installed on the Me 163 A series. Source Source: W. Spate and R. P. Bateson Messerschmitt Me 163 Komet

Technical Characteristics

The Me 163A was a high-speed, rocket-powered, swept-wing, short fuselage, mixed-construction tailless aircraft. The Me 163A fuselage was built using metal, divided into three sections, the front cockpit, central fuel tank, and the aft engine compartment.

The wooden wings had a very simple design consisting of two spars covered in thick fabric. If needed, the wings could be detached from the fuselage for transport. At the wings’ trailing edges ailerons were placed, which the pilot during flight used for pitch and roll. The wing area was 17.5 m² (57.4 ft²). The tail did not have the standard horizontal stabilizers, instead of having a single large vertical stabilizer. Despite this, no major problems during flights were ever noted on the Me 163A.

For the pilot to enter the cockpit he was provided with a ladder placed on the left side of the aircraft. The cockpit canopy opened upwards. Overall visibility was poor, and later versions would have an improved canopy. While it did offer some improvements for the pilot’s line of sight, it would not resolve the overall poor visibility of the aircraft. Given that the Me 163A was based on a DFS 194 glider, it was equipped with minimal instrumentation needed for the aircraft to be flown.

View of the Me 163A’s cockpit interior. [Spate & Bateson]
The Me 163A was powered by a single HWK R II 203 rocket engine, which gave 750 kg (1,650 lb) of thrust. The main fuel consisted of a mix of T and Z Stoff. These two chemicals were highly reactive, volatile, and prone to explosion. To avoid this, extensive preparation and security measures were necessary. The maximum speed this engine achieved was some 850 km/h (530 mph). This high speed was achieved to some extent thanks to the aircraft’s low weight. The empty weight was 1,140 kg (2,513 lbs) while the maximum takeoff weight was 2,200 kg (4,850 lbs).

Interestingly, in order to save weight, the Me 163 did not have a conventional landing gear unit. Instead, during take-off, it was provided with a specially designed two-wheel dolly. It would be jettisoned upon take-off. When landing on the airfield, the Me 163 used a retractable skid located beneath the fuselage.

Despite the A series having not been designed to have any weapon systems, at least one Me 163A was tested with the installation of the 5.5 cm (2.16 in) R4M air-to-air rockets.

Production Versions

  • DSF 194 – Prototype whose further development led to the creation of the Me 163
  • Me 163 Prototype Series– Prototype aircraft
  • Me 163A-0 – 10 Pre-production aircraft built

Conclusion

The Me 163A series, despite its unusual appearance and overall design, proved to be a rather successful aircraft. It had some shortcomings, mostly regarding its dangerous fuel load. Upon completion of successful testing, order for the Me 163B version was given.

Me 163A Specifications

Wingspans 8.85 m / 29 ft 3 in
Length 5.25 m / 17 ft 2 in
Height 2.16 m / 7 ft 8 in
Wing Area 17.5 m² / 57.4 ft²
Engine One HWK R II 203 rocket engine with 750 kg (1,650 lbs) of thrust
Empty Weight 1,140 kg / 2,513 lbs
Maximum Takeoff Weight 2,200 kg / 4,850 lbs
Maximum Speed 850 km/h / 530 mph
Crew 1 pilot

Gallery

Me 163A – Illustrated by Carpaticus

Credits

  • Written by Marko P.
  • Edited by by Ed Jackson & Henry H.
  • Illustrations by Carpaticus

Sources

  • D. Nešić (2008) Naoružanje Drugog Svetsko Rata-Nemcaka. Beograd.
  • W. Spate and R. P. Bateson (1971) Messerschmitt Me 163 Komet , Profile Publications
  • M. Ziegler (1990) Messerschmitt Me 163 Komet, Schiffer Publishing
  • M. Emmerling and J. Dressel (1992) Messerschmitt Me 163 “Komet” Vol.II, Schiffer Military History
  • E. T. Maloney and U. Feist (1968) Messerschmitt Me 163, Fallbrook
  • S. Ransom and H.H. Cammann (2010) Jagdgeschwader 400, Osprey publishing.
  • D. Donald (1990) German aircraft of the WWII, Brown Packaging books ltd
  • D. Monday (2006) The Hamlyn Concise Guide To Axis Aircraft OF World War II, Bounty Books.
  • M. Griehl (1998) Jet Planes of the Third Reich, Monogram Aviation Publication
  • M. Griehl (2012) X-Planes German Luftwaffe Prototypes 1930-1945, Frontline Book

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.