torpedo | Plane-Encyclopedia

Nazi Germany (1938)
Torpedo Bomber – 14 Built

The Fi 167 was developed out of a need for a dedicated torpedo-bomber to be operated on the first German aircraft carrier. While its overall performance proved to be satisfactory, due to the cancellation of the aircraft carrier project, only a small number were ever built. Unfortunately, information about the Fi 167 is not available or precise enough, with many disagreements between different authors.

Fieseler Flugzeugbau

In the early 1930’s, World War I fighter veteran Gerhard Fieseler (1896–1987) bought the Segelflugzeugbau Kassel Company, which mostly produced gliders, and renamed it to Fieseler Flugzeugbau. Gerhard Fieseler had gained experience in aircraft design while working as a flight instructor for the Raab-Katzenstein Aircraft Company in Kassel. In 1926, he managed to design his first aircraft, named Fieseler F1, which would be built by the Raab-Katzenstein company. By the end of twenties, Gerhard Fieseler designed another aircraft, the Raab-Katzenstein RK-26 Tigerschwalbe, of which 25 were built and sold to Swedish Air Force.

With his own company, he changed to focus on sports aircraft. In 1935, Gerhard Fieseler managed to obtain a licence for the production of military aircraft. While his best known design was the Fi 156 ‘Storch,’ he also designed the less known Fi 167 torpedo-bomber. The Fi 167 was built in small numbers and never managed to reach the fame of the Storch.

History of the Fi 167

As the German Navy began construction of its first aircraft carrier, the ‘Graf Zeppelin,’ in 1937, there was a need for a completely new torpedo bomber. For this reason, the German Ministry of Aviation (Reichsluftfahrtministerium) opened a tender for all German aircraft manufacturers who wished to participate to present their designs for such aircraft. The new aircraft was requested to have folding biplane wings, the best possible STOL (short take-off and landing) capabilities, and that the whole construction should have sufficient strength to successfully endure offensive combat operations at high speeds.

Only two manufacturers, Fieseler and Arado, presented their designs. For Fieseler it was the Fi 167 and for Arado the design was the Ar 195. In the summer of 1938, after a series of flight tests, the Fieseler Fi 167 was declared the better design. For this reason, another prototype was to be built for further testing.

The first prototype built, Fi 167 V1 (serial no. 2501), was powered by a DB 601 A/B engine. It was used mainly for testing and evaluation purposes. The second prototype (serial no. 2502) had some changes to the design, such as a modified undercarriage and was powered by the DB 601B. This engine would be used on later production versions. While most sources state that only two prototypes were built, some authors, like M. Griehl (X-Planes German Luftwaffe Prototypes 1930-1945), mention a third prototype being built. This third prototype, Fi 167 V3 (serial no. 2503), according to Griehl, was used to test the equipment used on this plane. While the sources do not give precise details about the fate of the Fi 167 prototypes, after May 1940, they were not present in the Luftwaffe inventory anymore. This may indicate that all three were scraped. After a number of tests with the Fi 167 were completed, series production of 80 aircraft was ordered.

Short lived operational service life

Fi 167 during flight in German service [Nature & Tech]

Despite having promising overall performance, the Fi 167 was directly connected with the Graf Zeppelin project. While the production of a small series was underway, the construction of the Graf Zeppelin aircraft carrier was stopped in 1940, so the same fate befell the Fi 167, as there was no longer a need for a carrier capable fighter. In 1942, there was a brief revival of the aircraft carrier concept, but by that time the Ju 87C was deemed better suited for this role. This decision was not without merit, as the Ju 87 was already in production and it would be much easier, quicker, and cheaper to simply modify it for the role of aircraft carrier torpedo bomber than to put the Fi 167 back into production.

As a small number of 12 Fi 167 A-0 were built, they were sent to Holland for evaluation and testing purposes in order not to waste the resources invested in them. These were used to form Erprobungstaffel 167 which operated in Holland from 1940 to 1942. In 1943, the Fi 167 were returned to Germany and Erprobungstaffel 167 was disbanded. Their use by the Germans from 1943 onward is not completely clear in the sources. While the majority were given to Germany’s allies in late 1944, the final fate of the remaining aircraft is not known, but they were probably either lost or scrapped.

Technical characteristics

Designed to operate from an aircraft carrier, the folding wings were necessary [Nature & Tech]

The Fi 167 was an all-metal, single engine biplane designed as a torpedo bomber. The Fi 167’s fuselage was constructed by using thin but with high-strength steel tubes that were welded together and then covered with duralumin sheet metal.

In the glazed cockpit there was room for two crew members, the pilot and the observer/rear gunner. The cockpit was covered with plexiglass but was open to the rear in order to provide the rear gunner with a good arc of fire. The Fi 167 was powered by the Daimler-Benz DB 601B 12-cylinder inverted-V engine putting out 1,100 horsepower. The total fuel load was 1,300 liters.

The Fieseler Fi 167 had a biplane layout. The upper and lower wings were the same in size and had a rectangular shape with rounded edges. The wings were divided into three parts in order to make any necessary maintenance or disassembly easier. Being designed to be used on an aircraft carrier, the Fi 167’s wings could also be folded. In order to be adequately structurally stable, the upper and the lower wings were interconnected by ‘N’ shaped metal rods. There were four of these ‘N’ shaped metal rods in total. These were then held in place with steel cables. For better control during flight, both wings were provided with flaps.

The landing gear consisted of two independent fixed landing wheels which were provided with shock absorbers to ease the landing. The forward landing gear units were covered with duralumin coating to help reduce the aerodynamic drag. To the rear there was a smaller fixed landing wheel. The Fi 167 landing gear was designed to be easily discarded in the case of a forced landing on water. The idea was that it would enable the Fi 167 to float on the water surface and thus provide more time for the crew to successfully evacuate the aircraft.

The armament consisted of two machine guns, one forward mounted 7.92 mm MG 17 with 500 rounds of ammunition and a second MG 15 of the same caliber mounted in a rear, flexible mount with 600 rounds of ammunition. The Fi 167 could be additionally armed with up to 2,200 lbs (1,000 kg) of bombs or one torpedo. In some sources, it is mentioned that there were actually two forward mounted machine guns.

Production

The German Navy was trying to build its first aircraft carrier, the Graf Zeppelin, but due to various reasons it was never completed. [Vaz]

The Fi 167 production run was quite limited, mostly due to cancellation of the Graf Zeppelin aircraft carrier. Besides the two or three prototypes, only a small series of Fi 167 (A-0) pre-production aircraft were made. How many were built varies depending on the source. Authors C. Chant (Pocket Guide: Aircraft Of The WWII) and D. Nešić (Naoružanje Drugog Svetskog Rata Nemačka) mention that, besides two prototypes, 12 pre-production aircraft were built. Authors F. A. Vajda and P. Dancey (German Aircraft Industry And Production 1933-1945) give a number of 15 aircraft produced. They also mention that a serial production of 80 Fi 176 was to be completed by June 1941 but, due to the cancelation of the project, this was never achieved. On different internet websites, the total number of Fi 167 built varies between 14 and 29.

Fi 167 V1 – Powered by the DB 601 A/B engine.
Fi 167 V2 – Had modified undercarriage and was powered by the DB 601B engine.
Fi 167 V3 – Possibly-built third prototype, but sources are not in agreement about its existence.
Fi 167A-0 – 12 aircraft built.

In Romanian hands?

It is commonly stated in many sources that the Fi 167 were sold to Romania in 1943. These were allegedly used to patrol the Black Sea. This is likely incorrect, as another German ally, the Independent State of Croatia ‘NDH,’ received nearly all Fi 167 produced. There is a possibility that the Fi 167 were given to Romanians and then returned back to Germany. But due to the lack of any valid documentation, this is only speculation at best.

In NDH service

A group of 11 (or 10 depending on the source) Fi 167 (serial no. 4801-4812) arrived in NDH during September 1944. These aircraft were given to the 1st Squadron stationed in Zagreb for the necessary pilot training. While during its service in the NDH, the Fi 167 was used in bombing combat operations, but was mostly used as a transport plane for food and ammunition. Due to having no problem carrying significant loads and its ability to take off or to land on short airfields, they were ideal for supplying many NDH garrisons besieged by Yugoslav Partisans.

Due to the overall difficult situation of the Axis forces on all fronts, the NDH Army and Air Force were plagued with frequent desertions, including a number of pilots. On 25th September 1944, while flying a Fi 167 (serial no. 4808), pilot Romeo Adum escaped to the Yugoslav Partisan held airfield at Topusko.

There is an interesting story about one Fi 167 piloted by Mate Jurković, as it is claimed he managed to avoid being shot down by five American P-51 Mustangs. This engagement happened on 10th October 1944 during a Fi 167 ammunition supply mission to Bosanska Gradiška. During this flight, the Fi 167 was attacked by a group of five Mustangs. Outgunned and outnumbered, the pilot could only hope to escape by using the Fi 167’s excellent maneuverability at lower altitudes. He eventually managed to escape his pursuers without taking any damage.

Due to a lack of spare parts, Allied air supremacy and Partisan advance, by April 1945 there were only four Fi 167 still present in the NDH Air Force. The condition of these planes is not known. Of these, at least three would be used after the war by the new JNA (Yugoslav People’s Army) army. During its operational use by the NDH Air Force, the Fi 167 was known as ‘The Great Fiesler’.

In Partisan hands

The Fi 167 operated by the Yugoslav Partisans during the war. The Red Star can be seen painted under the lower wings. [paluba.info]

As mentioned earlier, the Partisans managed to acquire one Fi 167. It would be redeployed to the island of Vis and included in the group of NDH aircraft that had defected earlier (one FP 2, two Saiman 200s, one Bü 131, and one Fiat G. 50).

On the 17th of October 1944, while on a liaison mission from Vis to the village of Vrdovo, after delivering orders to the command of the Partisan 20th Division stationed there, the Fi 167 piloted by M. Lipovšćak and with General Ćetković as a passenger began taking to the sky. Unfortunately for them, a group of four P-51 Mustangs attacked the lone aircraft. The Fi 167 was hit in the engine and the tail and the wounded pilot was forced to land on a nearby open plateau. While the pilot was only wounded, General Ćetković was dead, being directly hit by machine gun fire. Circumstances of this accident are not clear even to this day. The P-51 pilots later claimed that, due to bad weather, they could not see the Partisan markings. By the later account of the Fi 167 pilot, he claimed that the visibility was such that the Partisan markings could have been easily seen.

In JNA service

At least three Fi 167 were put into use by the JNA (Yugoslav People’s Army) after the war. Due to the lack of spare parts, their use was probably limited. They would remain in use up to 1948, but unfortunately they were probably all scrapped, as none survive to this day.

Conclusion

Despite being considered an overall good design, the Fi 167 was never put into mass production. The main reason for this was the cancellation of the Graf Zeppelin aircraft carrier. Nevertheless, the Fi 167 did see some limited service within the Luftwaffe, mainly for testing, but also with the Croatia NDH, where its performance was deemed sufficient.

Operators

Nazi Germany – Used the small number of Fi 167, mostly for various experimental purposes.
Romania – Allegedly supplied with Fi 167 in 1943, but this is not confirmed.
Independent State of Croatia NDH – Operated 10 to 11 aircraft between September 1944 and April 1945.
SFR Yugoslavia – Operated a small number of Fi 167 during the war and up to 1949.

Specification: Fi 167
Wingspan	44 ft 3 in / 13.5 m
Length	37 ft 5 in / 11.4 m
Height	15 ft 9 in / 4.8 m
Wing Area	490 ft² / 45.5 m²
Engine	One 1100 hp (820 kW) Daimler-Benz DB 601B
Fuel load	1,300 l
Empty Weight	6170 lb / 2,800 kg
Maximum Takeoff Weight	10,690 lb / 4,860 kg
Maximum Speed	200 mph / 325 km/h
Cruising Speed	168 mph / 270 km/h
Range	800 mi / 1,300 km
Maximum Service Ceiling	26,900 ft / 8,200 m
Crew	One pilot and one observer/rear gunner
Armament	One 7.92 mm MG 17 forward-firing machine gun One 7.92 mm MG 15 rear mounted machine gun Bomb load of 1.000 kg (2.200 lbs)or 750 kg (1650 lbs) torpedo