USSR (1923)
All-metal passenger aircraft – five Built

Following his successful first attempt to develop an aircraft, Andrei Nikolayevich Tupolev felt confident in his ability to attempt the design an all-metal aircraft. Although some European nations had already tested or built such aircraft during the First World War, this concept was still novel in the burgeoning Soviet Union of the early 1920s. With the advent of duralumin production in the Soviet Union, and the experimentation with various construction methods, Tupolev began work on the aircraft known as the ANT-2 in 1922. After a period of testing and evaluation, five aircraft of this type were constructed.

History

The success of the ANT-1 (standing for the initials of Andrei Nikolayevich Tupovlev) test aircraft prompted Tupolev to advocate for the development of fully metal-constructed aircraft. The harsh weather conditions in many parts of the Soviet Union caused wooden materials to decay quickly. Metal alloys, on the other hand, offered numerous advantages over wood: they were stronger, more durable, and allowed for overall more resilient aircraft designs. Tupolev saw the use of wood in modern aviation as an obsolete construction material.

His view was shared by others in the burgeoning Soviet aviation industry. In 1922, a commission at the Central Aero/Hydrodynamics Institute (TsAGI) was formed under the leadership of Andrei Nikolaevich. Its purpose was to spearhead the development of factories and facilities capable of producing duralumin. One such production center was already operating in Kolchuginsk, near Moscow, where the production of duralumin, nicknamed “Kolchugaluminium”, began in September 1922. This development enabled Tupolev to start working on an all-metal aircraft.

Tupolev established his design bureau with 15 supporting members. However, the initial phase was challenging, as the new technology required skilled workers who needed training in this new field. Additionally, many components used in all-metal aircraft construction had to undergo extensive testing. Tupolev, being a cautious man, did not want to risk any pilot’s life before he was certain that the new all-metal aircraft would perform as intended. Consequently, he spent considerable time refining various designs, mostly using speedboats and gliders. In 1921, Tupolev spent some time testing his ideas and designs using speedboats from his base of operations in Crimea. The experience he gained there greatly helped him in his further work.

Work On the ANT-2

As soon as Tupolev was sure that all crucial components were sufficiently tested, the work on the new all-metal aircraft, designated ANT-2, began in 1923. The design was largely driven by the requirements of the Soviet UVVS-RKKA (Directorate of the Air Fleet of the Workers and Peasants). This was the first official request for a new military aircraft, one capable of transporting two passengers, armed with two machine guns, and would most importantly, be inexpensive to build. Tupolev and his team established a small workshop in Kolchuginsk.

Initially, there were problems as the Kolchuginsk factory was only known for producing duralumin, not for shaping it into the various forms needed for aircraft construction. Time was needed to train the workers to effectively shape duralumin into the necessary parts.

During this period, while working on various proposed designs, Tupolev had the opportunity to inspect a Junkers K16 transport aircraft. The German company Junkers, wanting to avoid the sanctions on arms and aviation development imposed by the Allies, sought cooperation with the Soviets. They even managed to set up a small production plant in the Soviet Union.  The Soviets, in turn, were eager to acquire new technologies. The Junkers K16 featured a high wing and an open cockpit, design characteristics that Tupolev incorporated into his ANT-2 project.

The prototype was completed in 1924 and underwent its first flight test in late May of that year, piloted by Nikolai Petrov. To simulate the weight of two passengers, two sandbags were used, as Tupolev did not want to risk any lives at the prototype stage. Further flight tests were conducted on May 28 by a Soviet military delegation. Starting from June 11, the ANT-2 was tested with two, and occasionally three, passengers inside its fuselage. Overall, the performance was deemed sufficient, though a significant modification was required for the rear tail assembly. The rudder and stabilizer size had to be increased, subsequently improving the aircraft’s performance. To conduct further tests, four more aircraft were built. By 1930, at least one of these aircraft was equipped with a more powerful 200 hp Wright Whirlwind engine.

Fate

A total of five ANT-2 aircraft were produced. While these were used for various tests, their specific operational roles are not well documented. The anticipated military variant, which was to feature a new cockpit positioned behind the wings and be armed with one or two machine guns, was never built. The first aircraft has been preserved and can be seen at the Aviation Museum in Monino, near Moscow. The fate of the remaining aircraft is unclear, but they were likely scrapped at some point.

Specification

The ANT-2 was designed as a high-wing, all-metal monoplane. Tupolev chose a triangular shape for the fuselage, with the sides sloping inward from top to bottom. This triangular design provided excellent structural integrity, reducing the need for additional fuselage struts. The fuselage was divided into three sections: the front section housed the engine, the open cockpit, followed by a small passenger compartment. The compartment could accommodate two passengers seated opposite each other. Although the aircraft was intended for three occupants, this was generally avoided due to weight limitations. Passengers entered the aircraft through a door on the left side of the fuselage.

The wing was located just behind the cockpit. It was constructed with two spars connected by 13 ribs on each side and covered with duralumin. Tupolev designed the wing with a curved, concave underside. The entire wing assembly was then attached to the top of the fuselage using four bolts. To accommodate the cockpit, part of the central section of the wing was cut off. Additionally, two handles were added to the ends of the wings on both sides, allowing the ground crew to maneuver the aircraft on the ground. The rear tail assembly consisted of a metal frame covered with duralumin.

The landing gear featured two fixed road wheels mounted on vertical struts, equipped with shock absorbers to ensure smoother landings. At least one aircraft was instead fitted with skis. A pivoting tail skid was used at the rear.

It was powered by a Bristol Lucifer three-cylinder engine producing 100 horsepower. With it a maximum speed of 170 km/h could be achieved. This engine, however, had some difficulties due to its significant torque, which could occasionally damage the engine mounts. Topolev, aware of this issue, designed a strong mount to counteract this problem. To allow access for repairs, the engine cover was secured with a few bolts. The engine drove a wooden two-blade propeller with a diameter of 2.2 meters. Fuel was stored in two 36 kg tanks located in the wings.

The cockpit was open, and to enter, the pilot used a small footrest on the left side of the fuselage. The cockpit was equipped with the basic and necessary controls and indicators, such as fuel level, RPM counter, and oil pressure gauge.

Conclusion

While the ANT-2 did not enter mass production, this was less important as it showed that the concept of using metal for the construction of a fully functional aircraft was feasible. It was the first stepping stone of the new, and slowly rising, Soviet aviation industry. It was the first such aircraft to be successfully tested by the Soviets, and paved the way for further Tupolev’s research and work, which enabled him to develop, in time,  more advanced designs. In addition, it was the first aircraft that was officially ordered by the Soviets for limited production.

ANT-2 Specifications
Wingspans	10.45 m / 34 ft 3 in
Length	7.6 m / 24 ft 11 in
Height	2.12 m / 6 ft 11 in
Wing Area	17.9 m²  / 193 ft²
Engine	One
Empty Weight	523 kg / 1,153 lb
Maximum Takeoff Weight	837 kg / 1,846 lb
Maximum Speed	170 km/h / 106 mph
Range	750 km/ 466 miles
Maximum Service Ceiling	3,300 m / 10,926 ft
Crew	1 pilot
Armament	None

Illustration

 

Credits

• Article written by Marko P.
• Edited by  Henry H.
• Illustrations by Oussama Mohamed “Godzilla”

Sources:

• Duško N. (2008)  Naoružanje Drugog Svetsko Rata-SSSR. Beograd.
• Y. Gordon and V. Rigmant (2005) OKB Tupolev, Midland
• P. Duffy and A. Kandalov (1996) Tupolev The Man and His Aircraft, SAE International
• B. Gunston () Tupolev Aircraft Since 1922, Naval Institute press