Tag Archives: Roland

LFG Roland C.II

German Empire Flag German Empire (1915)
Reconnaissance Aircraft – 267 Built

A Roland C.II in flight. [Roland Aircraft of WWI]
The Roland C.II was a reconnaissance aircraft built by LFG Roland in 1915 as a new and innovative design. The type would see widespread use by the German Empire and, thanks to its highly advanced form, became the fastest and most maneuverable of its type when it was introduced. Overall improvements on the aircraft were done throughout the war to strengthen its performance, but by the end of the war, much more advanced aircraft had been deployed and made the Roland obsolete. The C.II was relegated to a training aircraft until the end of the war, when all were scrapped.

Development

In early 1915, the Luftfahrzeug Gesellschaft (L.F.G.), also known as Roland to avoid confusion with a similar sounding design firm, began building several Albatros aircraft under license. These aircraft were the Albatros B.I, B.II and the C.I, which were considered some of the most advanced in terms of aerodynamics for the current times. Around the same time, Dipl.-Ing. (Engineer) Tantzen would join Roland as chief designer. With Tantzen as the chief designer and their experience gained from license-building aircraft, Roland would begin designing a new and original plane, the C.II.

Work began on the C.II (C-types were two-seat armed aircraft) sometime in mid 1915. The C.II would have a very rounded, aerodynamic fuselage design, similar to the Albatros D.III fighters of the following year. The fuselage was created in a unique way, called Wickelrumpf (Wrapped body). Wickelrumpf involved using layers of veneer strips that were wrapped around a simple wodden frame. The shells created were then glued together around the wooden frame of the C.II and strengthened with fabric, making a very streamlined and sturdy fuselage. This whole process was an early attempt at monocoque construction, which involved having a shell built around a frame. However, the Wickelrumpf technique on the C.II used two stringers for the frame, a feature true monocoque aircraft don’t have. Like the fuselage, the wings were also designed to be very aerodynamic. Instead of having the wings connected with multiple spars and bracings, as was common with aircraft of the time, the wings of the C.II would be connected via a single wooden strut in a single bay wing.

The C.II prototype on October 24th, 1915, only hours before its disastrous test flight.

Before a prototype was completed, a C.II fuselage was mounted on a railcar for aerodynamic testing and other experiments. The train would swiftly go down a straight track between the cities of Schoneberg and Juterbog and data would be recorded on the aircraft. The first prototype C.II was completed in October of 1916 and its first test flight would happen between the 24th and 25th. This test flight would end in misfortune, with the D.III engine failing mid flight, resulting in a crash and subsequent damage to the aircraft. The prototype was quickly repaired and flying, with a second prototype completed soon after. In the test flights, it was found that, thanks to its aerodynamic design and powerful D.III engine, the C.II’s speed was extraordinary, surpassing all of the current C-type aircraft then in use. With such a feat, a production batch of 50 aircraft were ordered on December 23rd, 1915. Testing continued and it was found that the wing cells were slightly unstable, so an additional drag wire was added for stabilization. After this change was added to the design and prototypes, production of the type continued and, by March 7th, 1916, the first of the production aircraft were ready to be sent to the front.

Design

The last production batch of C.IIs [Roland Aircraft of WWI]
The interior frame of the C.II. This would be covered by the Wickelrumpf shells. [Roland Aircraft of WWI]
The Roland C.II was a two seat observation biplane. The body of the C.II was aerodynamic in shape and had a plywood frame, with the outer shell created via Wickelrumpf and made of veneer strips glued together and supported with fabric. Wickelrumpf produced a semi-monocoque fuselage. The body would have two seats, one for the pilot and one for an observer. On the sides of the fuselage were two pairs of celluloid windows for the observer to use. On several occasions, flight crews would paint curtains onto them. The windows themselves were modified by the crews to open by sliding backwards or downwards, but this was not a standard feature. Above the pilot’s position was a roll cage designed to prevent the pilot from being crushed in the event of a roll over on the ground. The initial design of the cage was circular but, once the frontal Spandau was added, the cage had to be redesigned and became more triangular in shape. No measure was given to protect the observer. The C.II used a Mercedes D.III engine mounted in the nose and driving a wooden propeller. The first two cylinders were exposed to the elements. The area surrounding the engine was the only part of the aircraft to have metal plating. Certain plates were hinged to allow for maintenance to the engine. For exhaust, the initial models used the “ocarina” style pipes, but later models would change between the ocarina style and others. The engines would have two ear radiators on each side of the craft. These protruding radiators obstructed airflow and caused drag. The tailfins were wooden and fabric covered. The control surfaces were made of steel tubes and covered in fabric. The tailfin was enlarged after the June 1916 batch to increase stability.

A sight all too common of the C.II. Due to its poor downwards visibility,
Pilots had trouble landing the aircraft. [Roland Aircraft of WWI]
The wings of the aircraft were made of wood and covered in doped fabric as was conventional at the time, with the control surfaces being made of steel tubes and also covered in doped fabric. The ailerons were originally in the lower wing but, starting with the C.IIa, these would be located in the upper wing. The wings themselves were the exact same length, shape and chord. Unique I-struts connected the wings together. The I-struts were of plywood construction and would have interior bracings in the shape of an X. The C.II would have a landing gear connected to the aircraft with v-shaped connectors. At the rear of the aircraft would be a landing skid.

Mid Production C.II [Roland Aircraft of WWI]
For armament, the C.II initially only had a single Parabellum 7.92 mm for the observer to use. After the first 50 aircraft, a forward firing synchronized Spandau 7.92 mm was added for the pilot. If needed, four bomb racks could be fixed to the underside of the wings to carry small bombs. The aircraft also carried several flares. A radio could also be carried on the aircraft and used by the observer. This was powered by an airscrew-powered dynamo located near the landing gear.

The “Walfisch” In Action

Otto Czernak’s C.II. This aircraft was modified with a rudimentary machinegun mount and an input system for the observer to request certain flight movements. [Roland Aircraft of WWI]
The Roland C.II arrived on the frontline in late March of 1916 and the effort put into its aerodynamic design was noted almost immediately. The C.IIs were the fastest aircraft used by the Luftstreitkräfte (German Air Force) at their introduction, outpacing all of their operational aircraft and almost all opposing Allied aircraft, only being superseded by a handful of Allied fighters. Because of its impressive speed, the Roland C.II was flown in special groups, as other two seater C-type aircraft could not keep up with the type. The Roland C.II was initially used as a reconnaissance plane, with the second crewman acting as the observer, but its speed allowed it to be used on escort duties as well. Despite its good speed, however, the C.II was not without its flaws. In the observer role, thanks to the crewmen being seated above the body, visibility above the plane was superb, but visibility in front of the aircraft was lacking, and visibility beneath the aircraft was poor. An attempt to fix this early on, before production began, was placing cutouts in the base of the wings, but this solution still do not provide adequate visibility. This flaw became fatal later on, once enemy pilots learned of this massive weak spot, as they would now dive beneath a C.II, then fly upwards towards it, firing their guns while the Roland crew had no means of detecting threats from that angle. This visibility issue also made landings especially dangerous, as the pilot had difficulty calculating how close the ground was. Aircraft of the time were well known to have difficulty upon landing, but the Roland C.II exhibited worse than average landing performance due to the visibility issue. Maneuverability and stability of the C.II was also lackluster at times and would need improvement.

Initially, the Roland C.II only had a single Parabellum 7.92 mm machine gun for the observer to use. The first fifty of these aircraft would have this small armament. Many of the pilots found this weak armament lacking. One pilot in particular, Lt. Otto Czernak of Schusta 28, would fix this issue on his own. He would rig up a forward firing apparatus for another Parabellum machine-gun that would allow the pilot to fire. Due to the propeller and machine-gun not being synchronized, the rig placed the gun well above the rotating radius of the propeller, making the rig very tall. Czernak’s own plane was modified in other ways as well, having a unique input system for his observer that would allow the 2nd crewman to communicate to Czernak to maneuvering instructions. No other C.II would have this system. After the first fifty aircraft, all C.II’s would have a synchronized Spandau machine-gun for the pilot to use. This gave the C.II some dogfighting ability, which is how it would end up being used for escort duties, along with its excellent speed.

A Linke-Hoffman produced C.IIa(Li). This particular aircraft has bomb racks installed. [Roland Aircraft of WWI]
At some point, either during its career or while it was still being developed, the C.II was given the unofficial nickname of Walfisch (Whale). The origin of this name has been told many times but there is no concise point that has been confirmed. The most common of these origins is said to have come while it was still in development, from a German official observing the type. Another reason could have been its overall round shape and how the early models were painted a silver-white color. Nonetheless, the name stuck around. The name Walfisch did not seem to have any negative connotation for its pilots, as many of them would paint fish or shark faces on their aircraft. Some would even paint scales. The previously mentioned Otto Czernak would paint a fish face onto his aircraft. This tradition was seen throughout its lifespan, even after the later two-toned camouflage models were introduced with green and brown paint.

A production of 24 aircraft, after the initial batch, with the modified machine-gun was ordered in March of 1916. Another batch of 45 aircraft was ordered in April. However, the batch of Roland C.IIs after this set would aim to fix many of the stability issues found with the aircraft in the field. The tailfin was enlarged to improve flight performance. The wings were shortened and the I struts were moved inward to compensate for the wing flexing. These made the wings much more structurally sound. This reworked design of the C.II was known as the C.IIa and testing of the type began in April and May of 1916. The type would be sent to the frontline by the summer. All C.II aircraft after this point would be of the C.IIa model. A batch of 19 C.IIa was ordered in April of 1916 and another batch of 36 C.IIa was also ordered, but with the ailerons in the upper wing. All aircraft after this would have the ailerons this configuration. A batch of 40 C.IIas was ordered in June of 1916 and would have a larger vertical fin to improve stability.

Production C.II [Roland Aircraft of WWI]
Most of the production Roland C.IIs were flying by the mid summer of 1916. The C.II was used extensively at the Battle of the Somme, where it was used in large numbers for recon and escort duties. On the second day of the Battle of the Somme, June 2nd, the soon-to-be-famous Albert Ball would go on a sortie in a Nieuport scout aircraft. While flying, his squadron would encounter 6 Roland C.IIs on patrol. The Allied squadron would begin their attack, while the Roland formation scattered. Ball was able to catch up to one and shoot it down, causing the C.II to plummet near the Mercatel-Arras road. This would be the first aircraft Ball completely destroyed in flight (There were several confirmed victories before this, but this was the first confirmed complete destruction of an aircraft). Many of Ball’s early kills were Roland C.IIs. Ball himself went on to compliment the C.II, stating it was the best aircraft the German’s had at the time, with a good defense to compliment its speed.

A C.IIa in two tone colors. This particular aircraft has been decorated by its crew, including painted on curtains over the celluloid covers and a shark mouth. [Roland Aircraft of WWI]
The Roland C.II was continually used through the rest of 1916. By summer, the Linke-Hofman company would begin license building C.IIs. An initial batch of 16 aircraft was ordered. The aircraft built under license were known as C.IIa(Li). In July of 1916, a batch of 40 aircraft was ordered to be produced by Linke-Hofman. This would be the last batch of C.IIs built and would be sent to the front in the beginning of 1917. By this time, however, the C.II had lost its performance edge. The Allies had fielded newer and improved aircraft that were able to easily keep up with the C.II, and the Germans had also produced newer aircraft that performed better. The C.II was instead returned from the front lines and used as a trainer for the C-type in flight schools. The C.II would perform this duty until hostilities ended in 1918. The fate of the remaining C.IIs is unknown, but they were most likely scrapped. No aircraft survive to this day.

The Roland C.III: A Derivative Design

The Roland C.III. It is apparent its design is based off of the C.II. Very little is known about this aircraft. [Roland Aircraft of WWI]
In mid-1916, a derivative design of the C.II emerged; the Roland C.III. The C.III shared many of the same design features of the C.II, such as a two-seat aerodynamic body with two windows on each side for observation purposes. However, most of the similarities stop there. The C.III was designed to use the more powerful 200 hp (149 kW) Mercedes D.IV engine over the C.II’s D.III. Based on the few pictures available, the prototype C.III appears to still use a D.III engine, most likely to test the airframe before the larger engine was placed. To compensate for a stronger engine, the wings of the C.II were made larger. The wings themselves were also reworked. Instead of having single bay wings with flat strut connectors, like the C.II, the C.III instead had the standard two bay wings typical of aircraft of the era. This was most likely done as the single struts of the C.II happened to obscure the vision of the frontal windows. The tail design of the C.III also differed from the C.II. Very little is known of the C.III outside of these few details, including whether or not it even flew or any further testing. The single C.III prototype was lost when LFG’s facility in Adlershof was destroyed in a fire on September 6th, 1916. This incident is cited to be caused by sabotage from British Special Forces. After the loss of the prototype, no further work on this type was done.

Conclusion

A lineup of several early C.IIs [Roland Aircraft of WWI]
At the time of its introduction, the C.II was one of the most advanced aircraft Germany had. Its powerful engine and aerodynamic construction allowed it to outperform most of its opposition. As the war continued, more advanced machines eventually outpaced the Roland C.II. The aircraft did manage to influence other companies to attempt more aerodynamic designs. Roland would continue building planes, including newer C-types (C.V and C.VIII) and fighter types, both of which would use Wickelrumpf. Two other aircraft were built off of the C.II’s design, the D.I fighter and the WD floatplane. Despite continuing to make newer aircraft, none of Roland’s designs would ever garner the same fame as their “Walfisch”, and it would remain their most iconic design of the war.

Variants

  • LFG Roland C.II Prototype – The prototype model of the C.II differed from the production version in several ways. Notably, it only had one set of windows. Two of these were built.
  • LFG Roland C.II – Standard model for the Roland C.II. After the initial batch, all aircraft would use a synchronized machine-gun in the nose.
  • Otto Czernak’s LFG Roland C.II – A modified early production C.II used by Otto Czernak of Schusta 28. It had a makeshift machine-gun mount and a unique input system for the observer to request movements from the pilot.
  • LFG Roland C.IIa – Later modified model of the C.II, had improved wings and a larger tailfin.
  • LFG Roland C.IIa(Li) – Designation given to C.IIa planes license-built by Linke-Hofman.
  • LFG Roland C.III – Derivative aircraft based on the C.II. Heavily reworked the wings and was given a Benz B.IV engine.

Operators

  • German Empire – The Roland C.II served as a reconnaissance aircraft and an escort aircraft in several squadrons of the Luftstreitkräfte from 1916 to 1918

LFG Roland C.II Specifications

Wingspan 33 ft 10 in / 10.33 m
Length 25 ft 3 in / 7.7 m
Height 9 ft 6 in / 2.9 m
Mean Aerodynamic Chord 4 ft 11 in / 1.5 m
Wing Area 91.7 ft² / 27.96 m²
Engine 160 hp (119.3 kW) Mercedes D.III 6-cylinder inline engine
Propeller 2-blade Wooden Propeller 
Weights
Empty 1739.5 lb / 789 kg
Loaded 2885.9 lb / 1309 kg
Climb Rate
Time to 3280 ft / 1000 m 7 minutes
Time to 6560 ft / 2000 m 14 minutes
Time to 9840 ft / 3000 m 26 minutes
Maximum Speed 103 mph / 165 km/h 
Flight Duration 4-5 hours (Varies on fuel load)
Crew 1 pilot

1 gunner

Armament
  • 1x Forward facing Spandau 7.92mm machine-gun
  • 1x Rear mounted Parabellum 7.92mm machine-gun
  • Multiple Bomb Racks (Not Standard)

Gallery

Illustrations by Ed Jackson

Roland C.II Prototype
Roland C.II Schusta 28 – Lt. Otto Czermack
Note the forward firing Lewis Gun mounted high to clear the propeller arc.
Roland C.II – Black Stripes over Pre-Production Paint
Roland C.II featuring a Shark Mouth
Roland C.IIa – Note the Larger Rudder
Roland C.III Prototype

Credits

  • Article written by Medicman
  • Edited by Stan Lucian & Ed Jackson
  • Illustrations by Ed Jackson
  • Herris, Jack. Roland Aircraft of WWI : a centennial perspective on Great War Airplanes. Charleston, SC: Aeronaut Books, 2014. Print.
  • Gray, Peter L., and Owen Thetford. German aircraft of the First World War. London: Putnam, 1970. Print.