Nazi Germany (1938)

Type: High endurance experimental, reconnaissance aircraft

Number built: Three prototypes

Before the outbreak of the Second World War, the Luftwaffe (Eng. German Air Force) was undergoing a massive expansion. Numerous new aircraft designs were either being introduced into service or undergoing testing, with many being integrated into the military for various roles. A number of newly developed aircraft were also primarily used for evaluation and experimentation, and, there were also several designs created specifically to set records. One such aircraft, the Me 261, was built specifically at the request of Adolf Hitler to set long-range records. Due to its specialized role, and the fact that it was not initially ordered by the Luftwaffe, only three prototypes of the Me 261 were built.

History

With the rise of Nazis in Germany, substantial financial resources were allocated to military projects. The Luftwaffe was founded, and saw massive expansion and the introduction of new aircraft designs. However, not all these designs were intended for pure military service. Some projects were mainly aimed at experimentation, and among these were aircraft designed solely to showcase technological advancements and break world records. This trend was quite common in the years leading up to the outbreak of the Second World War in Europe. For example, the Messerschmitt Me 209 was created to set a world speed record, with little to no concerns made over a possible military application.

Speed was not the only record to be pursued, there were others, such as long-range flight. This particular challenge fascinated Hitler, who in 1937, initiated the development of a long-range monoplane. Aside from the many things that might be learned from the experiment, Hitler envisioned this aircraft undertaking the long-range flight from Berlin to Tokyo for the 1940 Olympic Games, carrying the Olympic Torch from Germany over Asia. To meet this requirement, the initial requirements specified that the aircraft needed to have an operational range of over 13,000 km.

The Reichsluftfahrtministerium (RLM), or German Air Ministry, selected the Messerschmitt company for this task. Despite being a relatively small enterprise at the time, Messerschmitt had achieved great success with the Bf 109, one of the best fighters of its era. The official contract was signed on the 18th March, 1938. Under the designation P.1064, Messerschmitt presented a proposal to Hitler for a new aircraft. This aircraft was to be operated by a crew of five within a rather cramped, and elongated fuselage. Due to the aircraft’s specific role, the fuel load was prioritized over crew comfort. Hitler approved the proposal and ordered the construction of three prototypes. The project was subsequently renamed Me 261. Due to Hitler’s keen interest, the aircraft was nicknamed Adolfine by its crew.

In 1939, work began on the three Me 261 prototypes. Despite Hitler’s ambitions, the Me 261 was given low priority, and construction proceeded slowly, and anticipating a war with Poland, work on these aircraft was halted. However, recognizing its potential for long-range reconnaissance and the valuable information it could provide, work resumed in 1940.

The first prototype, Me 261 V1 (BJ-CP or BC-CP, depending on the sources), was flight-tested by Karl Baur in December 1940. The following year, the second prototype, Me 261 V2 (BJ-CQ), was tested. The V2 featured a glazed observation dome on the dorsal fuselage, replacing the rear dome used on the V1. The construction of the third prototype, Me 261 V3 (BJ-CR), faced delays and only completed its test flight in 1943. This version was distinct from the earlier prototypes, featuring a larger crew capacity of seven and being powered by two 2,950 hp DB 610 engines. On the 16th April, 1943, Karl Baur conducted a ten-hour test flight with the V3.

 

Technical characteristics

Unfortunately, since the Me 161 did not progress beyond the prototype stage. It was designed as an all-metal, long-range transport and later as a reconnaissance aircraft. The fuselage was slim but cramped, made of metal, and covered in duralumin.

The wings of the Me 261 were constructed using a metal frame with a single spar. They were then covered with flush-riveted, stressed-skin metal panels. Notably, the section of the wing closest to the fuselage had a thick profile, which tapered to the wingtips. This design was intentional, as it allowed for a large fuel storage area. The aircraft also featured a twin-rudder tail at the rear.

For its long-range flight operations, the Me 261 had a crew of five: a pilot, co-pilot, radio operator, navigator, and flight engineer. The pilot and copilot sat side-by-side in the cockpit with the radio operator in a central compartment, and the flight engineer and navigator seated in the rearmost compartment, where the aircraft’s bunks were also located.

The first two prototypes were powered by twin 2,700 hp DB 606A/B twenty-four-cylinder engines. These engines were essentially two twelve-cylinder DB 601 engines coupled together to drive a single shaft, requiring two separate radiators and oil coolers. Each DB 606A/B engine was housed within a large nacelle and used four-blade propellers with a diameter of 4.6 meters.

Despite frequent mentions of the aircraft being overburdened, sources do not specify a consistent maximum takeoff weight. Additionally, the total fuel capacity is also unspecified. Depending on the sources, the operational range varies from 11,000 to 13,200 km.

To accommodate the aircraft’s weight, it required large-diameter landing wheels that could retract up to 90 degrees into the wings. In addition to these, it had a fully retractable tail wheel retracted towards the front of the aircraft.

Fate

Despite demonstrating some potential for long-range reconnaissance, the Me 261 was ultimately rejected from service due to the additional equipment requirements that would have further strained its already overburdened airframe, thereby compromising its flight performance. Despite its cancellation, the V3 prototype (and possibly the other two prototypes) saw operational use as reconnaissance aircraft during the war. In July or April of 1943, the V3 suffered an accident during landing that heavily damaged its landing gear. Although repaired and returned to service, the V3 was eventually scrapped by order of the RLM.

The V1 aircraft was lost during an Allied bombing raid on the Rechlin test center in September 1944, while the V2 was captured by the Allies at the same location in April 1945. Neither prototype survived the war; the captured V2 was scrapped a few weeks after its capture.

Conclusion 

The Me 261 was an aircraft that was not ordered by the Luftwaffe as a military aircraft and thus received low priority. Despite its initial potential for use as a reconnaissance aircraft, it quickly became evident that it would not be feasible for adoption in this role due to its considerable weight. Ultimately, only three were built, and none of them survived the war.

Me 261 V3 Specifications
Wingspans	26.9 m / 88 ft 1 in
Length	16.7 m / 54  ft 9 in
Height	4.72 m /  15 ft  5 in
Wing Area	76 m² /  817.8 ft²
Engine	Two 2,950 hp DB 610 engines
Endurance	24 hours and 36 minutes
Maximum Speed	620 km/h / 385mph
Cruising speed	400 km/h / 248 mph
Range	11,000 km / 6,831 miles
Maximum Service Ceiling	8,250 m  / 27,060 ft
Crew	1 pilot
Armament	None

Illustration

Credits

• Article written by Marko P.
• Edited by  Henry H.
• Illustration by Oussama Mohamed “Godzilla”

Source:

• D. Herwig and H. Rode (2000) Luftwaffe Secret Projects Strategic Bombers 1935 to 1945, Midland Publishing
• D. Nesić  (2008)  Naoružanje Drugog Svetsko Rata-Nemačka. Beograd
• D. Monday (2006) The Hamlyn Concise Guide To Axis Aircraft OF World War II, Bounty Books.
• J. R. Smith and A. L. Kay (1972) German Aircraft of the WW2, Putnam

• B. C.Wheeler, German Fighters of WWII, Aeroplane Special
• R. Jackson (2005) Infamous Aircraft, Pen and Sword
• M. Griehl () X-planes German Luftwaffe prototypes 1930-1940, Frontline Book
• W. Green (1970) Warplanes of the Third Reich, Doubleday & Company
• https://oldmachinepress.com/2021/07/20/daimler-benz-db-606-db-610-and-db-613-doppelmotoren/