Tag Archives: Japanese Air Force

Mitsubishi G7M “Taizan”

Empire of Japan, WW2, , , ,

 Empire of Japan (1941)
Strategic Bomber- 1 Scale Mockup Built

The Mitsubishi G7M “Taizan” (泰山/Great Mountain) was a planned long range strategic bomber for Imperial Japan’s Army Air Service. Developed out of the need for a bomber capable of striking the continental United States, the Taizan would face a series of developmental problems, ultimately leading to the cancellation of the project.

History

Prior to the start of World War II, Japan had foreseen that in a potential future conflict with the United States, it would require a long range bomber capable of striking the US mainland. In order to fulfill this requirement, a review was conducted in 1941 of all the Imperial Japanese Navy’s bomber aircraft in service. It was revealed that the entirety of the Japanese bomber arsenal was incapable of striking targets in the United States from the Japanese airfields. The Mitsubishi G4M “Betty” was one of Japan’s newest aircraft being pushed into service. Despite its superior range of 3,749 mi (6,043 km) compared to previous IJN bombers, it still was not sufficient enough to strike the US mainland or targets deep in the Soviet Union. As a result of this, the Naval Kōkū Hombu (Aviation Bureau) issued the 16-shi specification in 1941 for a long range bomber. The 16-shi specification would call for a bomber capable of flying at least 361 mph (580 km/h) with a maximum range of 4,598 mi (7,340 km).

Interested in this specification, Mitsubishi’s staff began work on a design that would meet the criteria set by the Kōkū Hombu. Mitsubishi engineer Kiro Honjo (the designer of the G3M and G4M) proposed a four engine design, but this was promptly rejected by the Kōkū Hombu. As a result, another Mitsubishi engineer by the name of Kijiro Takahashi submitted his own design. Upon inspection by the Kōkū Hombu, Honjo’s design was approved and given the green light to proceed. Within Mitsubishi, the 16-shi design was known as the “M-60”. Takahashi’s design was to be powered by two “Nu” engines. The Nu was a 24 cylinder liquid cooled engine which was able to provide 2,200 hp at 16,404 ft (5,000 m) but, due to the start of Operation Barbarossa, Germany was unable to export machinery and tools needed to manufacture the Nu engine. Unfortunately for Takahashi, this turn of events would prevent his design from being completed. As a result of this, Takahashi fell out with the Kōkū Hombu and Kiro Honjo would take over the M-60 project. This time, Honjo followed the Kōkū Hombu’s suggestion and used two engines instead of his idea of four. Under Honjo’s lead, the Taizan’s power plant was changed to two 18 cylinder Mitsubishi Ha-42-11 engines capable of generating 2,000 hp each. It was also seen that Honjo’s design was less aerodynamic than Takahashi’s due to the weaker engines and heavier armament.

On October 31st of 1942, an evaluation was conducted on the work done so far, and a performance estimation gave the Taizan a range of 3,454 mi (5,559 km) and a speed of 332 mph (518 km/h) at 16,404 mi (5,000 m). Falling short of the original 16-shi specification, Mitsubishi scrambled to make adjustments but further revised estimates stated that the design didn’t see any improvements, and actually saw some deterioration. By the time the Taizan’s design was completed in late 1942 and ready for construction of a wooden mockup, a new 17-shi specification was released calling for a new bomber design. Kawanishi took up the design and created the K-100 bomber project. Seeing promise and a better alternative to the Taizan, the Kōkū Hombu ordered all work on the Taizan to be halted until the K-100 could be completed and evaluated. Kawanishi completed initial work on the K-100 and a comparison was made between K-100 and Taizan in the summer of 1943. The Taizan’s range differed significantly from the proposed normal range from 2,302 mi (3,705 km) to 1,726 mi (2,778 km). Due to the significant range reduction, the Kōkū Hombu stopped supporting the Taizan. With no more interest and reason to develop the Taizan, Mitsubishi would finally shelve the project and stop all work on it.

Design

From an exterior aesthetic point of view, the Taizan bears a striking resemblance to the German Heinkel He 177. The nose of the Taizan was rounded and glazed over, a new design not in use by any Japanese bombers at the time. The wings of the Taizan were mounted mid fuselage, and were to be constructed out of metal. Fabrics, however, were to be used for the cover of the Taizan’s ailerons and rudder.

Ordinance wise, the Taizan was to carry a maximum bomb load of 1,764 lbs (800 kg). The defensive armament underwent several changes. Takahashi’s Taizan design was to be armed with two 20mm Type 99 Mk.2 cannons and two 7.7mm Type 97 machine guns. Honjo’s initial design would carry two 20mm Type 99 Mk.2 cannons, two 13mm Type 2 machine guns and two 7.92mm Type 1 machine guns. Later on, the armament finalized at two 20mm Type 99 Mk.2 cannons and six 13mm Type 2 machine guns. There would have been one Type 99 Mk.2 in the nose and one in the tail. There would have been two Type 2 machine guns in the forward upper fuselage turret, two in the rear fuselage turret and two in ventral position, firing rearwards.

Operators

  • Empire of Japan – The Taizan would have been operated by the Imperial Japanese Navy Air Service.

 

Mitsubishi G7M1 “Taizan” *

*Estimated performance of Mitsubishi’s G7M1 proposal
Wingspan 82 ft / 25 m
Length 65 ft 6 in / 20 m
Height 20 ft / 6.09 m
Engine 2x Mitsubishi Ha-42-11 (2,000 hp)
Power Loading 8.8 lbs/hp / 3.99 kg/hp
Empty Weight 23,368 lbs / 10,600 kg
Usual Weight 35,273 lbs / 16,000 kg
Fuel Capacity 4,497 L / 1,188 US Gallon
Climb Rate 32,808 ft / 10,000 m in 10 minutes
Maximum Speed 344 mph / 544 kmh @ 26246 ft / 5,000 m
Typical Range 1,739 mi / 2,799 km
Maximum Range 4,598 mi / 7,400 km
Crew 7
Defensive Armament 6x 13x64mm Type 2 machine guns

2x 20×101mm Type 99 Mk.2 cannons
Ordnance / Bomb Load 1,764 lb / 800 kg – Maximum

Gallery

 

Artist’s conception of the operational G7M Taizan

Sources

Dyer, E. M. (2013). Japanese secret projects: experimental aircraft of the IJA and IJN 1939-1945. Burgess Hill: Classic., Aircrafts of Imperial Japanese Navy. (n.d.). Retrieved February 06, 2018, from http://zenibo-no-milimania.world.coocan.jp/epljn.html, Images: Side Profile Views by Ed Jackson – Artbyedo.com

 

Kawasaki Ki-88

Empire of Japan, WW2, , , ,

 Empire of Japan (1943)
Prototype Fighter Interceptor – 1 Built

The Kawasaki Ki-88 was a fighter interceptor designed in 1942 with the intent of intercepting enemy aircraft heading towards vital military locations. The Ki-88 would never see service, as it was cancelled in 1943 after a mockup and partial prototype were constructed. Although considered by many to be the Japanese copy of the American Bell P-39 Airacobra due to the exterior aesthetic similarities, this is only speculation.

History

The origins of the Kawasaki Ki-88 began in August of 1942 when Tsuchii Takeo, a designer for Kawasaki, responded to a design specification put forward by the Imperial Japanese Army Air Service (IJAAS). The IJAAS determined that they needed an interceptor aircraft that would defend important military assets like airfields, gun emplacements, and others. The specification also stated that the aircraft had to be heavily armed, provide a stable gun platform and be easily flyable by new pilots.

Takeo began work on the Ki-88 and chose to use a 37mm Ho-203 cannon as the plane’s primary armament, with two 20mm Ho-5 cannons to complement the Ho-203. The placement of the guns prompted Takeo to place the engine behind the cockpit. Many sources state that this was done to copy the American Bell P-39 Airacobra, but that claim is debated. The P-39 Airacobra was in service at the time the Ki-88 was developed, but saw limited service with the United States. It did however, see service during the Battle of Guadalcanal. The Japanese were certainly aware of its existence and possibly captured an example of the P-39. If they did indeed capture an example, Takeo could have simply copied the gun and engine placement. It is important to note that such a “rear-engine” fighter configuration was a rarity in plane design at the time. Another common theory is that Takeo came to the same conclusion as H.M Poyer (designer of the P-39) did during the planning phase and designed the plane without copying the P-39. Other than the engine and gun placement, the two planes are quite dissimilar.

Takeo completed the Ki-88’s design in June of 1943. A full scale mockup and prototype were in the works in mid/late 1943, and estimated that the prototype would be completed in October of 1943. However, after the mockup and plans were inspected by representatives of the IJAAS, it was concluded that the Ki-88 had no real improvements over other designs of the time, and the top speed was only slightly better than the Kawasaki Ki-61 after calculations. The IJAAS immediately lost interest and ordered Kawasaki to cease all work on it.

Design

The Ki-88 was a single seater, single engine fighter powered by a Kawasaki Ha-140 engine producing 1,500hp while driving a propeller using an extension shaft. The radiator was placed under the cockpit at the bottom of the fuselage. There was an air intake placed beneath the fuselage on the left to provide cooling for the supercharger in the Ha-140.

The Ki-88 used a conventional landing gear, in which the main wheels could be retracted into the wings while the tail wheel stayed fixed. There was a fuel tank in each of the wings, beside the landing gear wells.

The size of the Ho-203 canon prevented Takeo from placing the engine into the nose which led him to place it behind the pilot’s cockpit, much like the American P-39 Airacobra. Moving the engine to the back of the cockpit was a smart move, as it theoretically would have made the plane a more stable gun platform. Under the Ho 203, on both sides of the nose, there were two 20mm Ho-5 cannons.

Operator(s)

  • Empire of Japan – The Ki-88 was supposed to have been operated by the Imperial Japanese Army Air Service, but never did so due to the design being deemed as inferior to the Ki-61 and was thus cancelled.

Kawasaki Ki-88*

*Estimated Performance
Wingspan 40.6 ft / 12.37 m
Length 33.4 ft / 10.18 m
Height 13.6 ft / 4.14 m
Wing Area 8,598 ft² / 27.49 m²
Engine 1x Kawasaki Ha-140 (1,500hp)
Empty Weight 6,503 lbs / 2,949 kg
Loaded Weight 8,598 lbs / 3,899 kg
Climb Rate 6 minutes & 30 seconds to 16,404ft (5,000m)
Maximum Speed 373 mph / 600 kph at 19,685ft (6,000m)
Range 745 mi / 1,198 km
Maximum Service Ceiling 36,089 ft / 11,000 m
Crew 1x Pilot
Armament 1x 37mm Ho-203

2x 20mm Ho-5

Gallery

 

Sources

Performance. Report No. 19b(4), USSBS Index Section 2 (Tech. No. 19b(4)). (n.d.)., Pacific Survey Reports and Supporting Records 1928-1947 Kawasaki Aircraft Industries Company, Ltd. (Kagamigahara, Gifu plant), Dyer, Edwin M. Japanese Secret Projects: Experimental Aircraft of the IJA and IJN 1939-1945. Classic, 2013., Francillon. (1987). Japanese aircraft of the Pacific war. Annapolis, Md: Naval Institute Press., Images: Side Profile Views by Ed Jackson – Artbyedo.com